
General cable entry
Standard Nylon Cable Glands
PA6 cable entries for control panels, junction boxes and general electrical enclosures. Compare Metric, PG, NPT and G threads within one standard range.
CHSO / CABLE MANAGEMENT
Select the cable entry around the cable, the enclosure and the environment. Compare standard and specialised formats, then check the dimensions that determine fit.
7 product series · Thread and cable-size selection

01 / PRODUCT RANGE
Each series brings its selection details and available dimensions together in one place.

General cable entry
PA6 cable entries for control panels, junction boxes and general electrical enclosures. Compare Metric, PG, NPT and G threads within one standard range.

Metal cable entry
Nickel-plated brass cable glands for machinery and industrial enclosures. Select the mounting thread and sealing range together, then confirm the mounting hardware.

Corrosion-conscious selection
Stainless steel cable entries for equipment where corrosion exposure and cleaning conditions guide material selection. Use the selected Metric configurations below as a dimensional reference.

Cable bending support
An extended spiral supports the cable where it leaves the gland. Compare nylon and brass formats for cable entries exposed to repeated bending.

Multiple or flat cables
Bring separate round cables or a flat cable through one mounting entry using a seal matched to the cable profile. Select the insert geometry before choosing the final model.

Screened cable entry
Metal cable glands with a shield contact for screened cables. Select against both the outer cable jacket and the exposed shield diameter.

Mounting & sealing parts
Match locknuts, flat washers, O-rings, stop plugs and thread converters to the gland and enclosure. Keep fastening, sealing and thread conversion as separate selection decisions.
02 / SELECTION LOGIC
The thread size alone does not identify the correct sealing configuration.
Default standard nylon: PA6, without a flat washer, IP55. IP68 requires the specified flat washer and correct installation. Metal and specialised ranges have their own configuration requirements.
TECHNICAL SELECTION
Thread designation, cable clamping range and panel opening are different dimensions.
| Thread family | How to specify it | Independent selection check |
|---|---|---|
| Metric | Diameter × pitch, e.g. M20 × 1.5 | Match both dimensions; cable range is selected separately. |
| PG | Full PG size, e.g. PG13.5 | PG is a different thread system; do not replace it using nominal size alone. |
| NPT | Nominal inch size plus NPT | Tapered thread. Follow the specified engagement and sealing method. |
| G / BSPP | Nominal inch size plus G | Parallel thread. Use the specified interface seal; G is not NPT. |
The CHSO standard-nylon tables list M12–M63 at 1.5 mm pitch and the listed M72–M114 sizes at 2 mm pitch. Use the selected configuration; these pitches are not a rule for every manufacturer or gland series.
SELECTION SUPPORT
Identify the cable outside diameter, mounting thread or hole, panel thickness and environment. Then select the body material, sealing configuration and required accessories.
No. Standard nylon is supplied without a flat washer by default and is IP55. IP68 requires the specified flat washer, correct sealing configuration and correct installation.
No. Specify the exact thread standard and size. If the enclosure and gland differ, select a matched reducer or enlarger using both male and female thread specifications.
For multi-hole glands, provide the number and diameter of individual cables. For flat cable, provide its cross-section. For EMC glands, specify both jacket diameter and exposed shield diameter.
SOURCING / QUOTATION
Include the series or reference, quantities and installation requirements. Add the drawing, sample or documentation you need for approval.
Contact CHSO →