
Self-locking Nylon Cable Ties
One-piece PA66 ties for wire bundles, panels and equipment. Compare actual strap width, length, maximum bundle diameter and minimum loop tensile strength.
CHSO / cable management
Start with the bundle and fixing method. Compare strap dimensions, locking designs and packaging, then build an enquiry with the exact configuration.

Choose by function
Use actual strap width and bundle capacity to compare models. Keep specialised products separate from general cable-bundling requirements.

One-piece PA66 ties for wire bundles, panels and equipment. Compare actual strap width, length, maximum bundle diameter and minimum loop tensile strength.
Reopen and adjust a bundle during assembly or maintenance. Type A and Type B use different release-head designs; select the type together with its dimensions.
Bundle the cables and secure the tie head to a panel with a screw. Compare the actual length and the 3.6 mm mounting-eye diameter.
Identify a cable bundle on the plate integrated with the tie head. Select the strap size, bundle diameter and writing area as separate dimensions.
A two-head tie forms two separate loops. Compare the D1 and D2 bundle ranges for the two bundles, together with strap width and tensile strength.
Wide straps with a dual-lock head for applications requiring a different locking arrangement from the standard single-head tie.
Ball-lock metal ties in 4.6, 7.9 and 12 mm strap widths. Specify the steel grade, finish and secondary size reference with the CS model.
A reusable PE tie for garden and plant-support bundling. The shaped strap can be reopened to adjust the loop.
PA66 double-loop restraint ties with a dedicated head geometry. Keep this special-purpose configuration separate from electrical cable-bundling ties.
Modified-nylon anti-skid ties in two listed configurations. Specify the tyre dimensions and vehicle application with the requested model.
PE spiral wrap groups wires while allowing branch cables to exit along the bundle. Select the internal diameter, outside diameter and wrapping range.
Compare blister and jar assortments by tie size, colour, quantity and pack format. Review the contents of each pack before specifying a retail or distributor order.
Selection sequence
Measure the bundle diameter. Choose a standard, releasable, mounting or identification head.
Check actual strap width and the listed bundle capacity. Loop tensile figures are test values, not working-load ratings.
Specify nylon grade and outdoor exposure, or steel grade and coating. Black colour alone does not establish UV resistance.
State pieces or sets, colour mix, pack format and destination. For assortments, approve the component schedule.
Model enquiry
Add models from the tables, complete the quantities and copy your list into the contact form.
Contact CHSO →The list stays in this browser until cleared. Adding a model does not send an enquiry.