PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Home/Products/Cable Ties/Mountable Head Cable Ties

Screw-mount eye

Mountable Head Cable Ties

Bundle the cables and secure the tie head to a panel with a screw. Compare the actual length and the 3.6 mm mounting-eye diameter.

2model / pack configurations
PA66 / Nylon 6.6material / configuration
CHSO Mountable Head Cable Ties
Screw-mount eye

Technical overview

Configuration & material

Material
PA66 (nylon 6.6)
Material flammability
UL 94 V-2 grade
Fixing method
Screw through the head eye
Mounting-eye diameter
3.6 mm; select the screw and panel fixing separately

Compare & select

Model selection

Download specifications · CSV ↓

2 matching configurations

Dimensions are in millimetres unless stated. On smaller screens, scroll the tables horizontally.

Screw-mount head models

Mountable Head Cable Ties — Screw-mount head models
ModelLength L (mm)Actual width W (mm)Max. bundle Ø E (mm)Min. loop tensile (lbf)Approx. equivalent (N)Mounting eye Ø (mm)Enquiry
CS-4×150MT1453.632401783.6
CS-4×200MT2203.642401783.6

Product details

Outline & product views

Selection notes

  • CS-4×150MT has a listed length of 145 mm; CS-4×200MT has a listed length of 220 mm. Select from the dimension columns rather than inferring length from the model.
  • The 3.6 mm value is the mounting-eye diameter, not an instruction to drill every panel to 3.6 mm.
  • Loop tensile strength and the strength of the panel fixing are separate requirements.
  • Tensile figures are minimum loop test values, not allowable working loads. Approximate newton figures are calculated from lbf; no separate kilogram-force rating is inferred.

Before you order

Product questions

What are the actual lengths of the two models?

CS-4×150MT is listed at 145 mm; CS-4×200MT is listed at 220 mm. Both have a 3.6 mm mounting-eye diameter. Use the actual dimensions when reviewing fit.

Model enquiry

Specify the configuration

Add models from the tables, complete the quantities and copy your list into the contact form.

Contact CHSO →

Include with your request

  • Model, product family and quantity in pieces or sets
  • Colour, material grade and required operating conditions
  • For metal ties: width, steel grade and bare or coated finish
  • Packaging, destination and required inspection documents

The list stays in this browser until cleared. Adding a model does not send an enquiry.