Integrated marking plate
Marker Cable Ties
Identify a cable bundle on the plate integrated with the tie head. Select the strap size, bundle diameter and writing area as separate dimensions.
Technical overview
Configuration & material
- Material
- PA66 (nylon 6.6)
- Material flammability
- UL 94 V-2 grade
- Identification
- Write on the marking plate with a suitable permanent marker
- Plate formats
- 12 × 24, 13 × 20 or 15 × 25 mm
Compare & select
Model selection
4 matching configurations
Dimensions are in millimetres unless stated. On smaller screens, scroll the tables horizontally.
No matching configuration. Clear the filters or send your required dimensions.
Marker tie models
| Model | Length L (mm) | Actual width W (mm) | Max. bundle Ø E (mm) | Min. loop tensile (lbf) | Approx. equivalent (N) | Marking plate (mm) | Enquiry |
|---|---|---|---|---|---|---|---|
| CS-100MT | 100 | 2.5 | 22 | 18 | 80 | 12 × 24 | |
| CS-110MT | 110 | 2.5 | 22 | 18 | 80 | 13 × 20 | |
| CS-150MT | 150 | 3.0 | 32 | 40 | 178 | 15 × 25 | |
| CS-200MT | 200 | 3.0 | 42 | 40 | 178 | 15 × 25 |
Product details
Outline & product views
Selection notes
- Plate dimensions are not strap width. Check text size and the marking process against the selected plate.
- Use the MT ordering codes listed in the model table. Confirm the plate orientation on the sample before printing a production batch.
- Tensile figures are minimum loop test values, not allowable working loads. Approximate newton figures are calculated from lbf; no separate kilogram-force rating is inferred.
Before you order
Product questions
Which plate sizes are available?
CS-100MT has a 12 × 24 mm plate; CS-110MT has a 13 × 20 mm plate; CS-150MT and CS-200MT have a 15 × 25 mm plate. Check plate orientation before preparing marking artwork.
Model enquiry
Specify the configuration
Add models from the tables, complete the quantities and copy your list into the contact form.
Contact CHSO →Include with your request
- Model, product family and quantity in pieces or sets
- Colour, material grade and required operating conditions
- For metal ties: width, steel grade and bare or coated finish
- Packaging, destination and required inspection documents
The list stays in this browser until cleared. Adding a model does not send an enquiry.