Two-loop bundle separation
Double Head Cable Ties
A two-head tie forms two separate loops. Compare the D1 and D2 bundle ranges for the two bundles, together with strap width and tensile strength.
Technical overview
Configuration & material
- Material
- PA12 or PA66; specify the required grade
- Locking action
- Non-releasable, two-loop design
- Range notation
- D1 and D2 refer to separate loops
Compare & select
Model selection
4 matching configurations
Dimensions are in millimetres unless stated. On smaller screens, scroll the tables horizontally.
No matching configuration. Clear the filters or send your required dimensions.
Double-head two-loop models
| Model | Length L (mm) | Width W (mm) | D1 bundle range (mm) | D2 bundle range (mm) | Min. loop tensile (lbf) | Approx. equivalent (N) | Enquiry |
|---|---|---|---|---|---|---|---|
| CS-5×225 | 225 | 4.8 | 2.5–59 | 2–52 | 50 | 222 | |
| CS-5×300 | 300 | 4.8 | 2.5–83 | 2–78 | 50 | 222 | |
| CS-5×370 | 370 | 4.8 | 2.5–105 | 2–98 | 50 | 222 | |
| CS-8×300 | 300 | 7.6 | 2.5–83 | 2–78 | 100 | 445 |
Product details
Outline & product views
Selection notes
- Include “Double Head” with the model code in the enquiry. Some codes also occur in the self-locking range and identify a different product.
- Confirm both loop diameters and the required separation between bundles.
- Tensile figures are minimum loop test values, not allowable working loads. Approximate newton figures are calculated from lbf; no separate kilogram-force rating is inferred.
Before you order
Product questions
How do I specify the two bundle sizes?
Give the required diameter for each loop. The table lists D1 and D2 separately because their adjustment ranges differ. Include “Double Head” with the CS model.
Model enquiry
Specify the configuration
Add models from the tables, complete the quantities and copy your list into the contact form.
Contact CHSO →Include with your request
- Model, product family and quantity in pieces or sets
- Colour, material grade and required operating conditions
- For metal ties: width, steel grade and bare or coated finish
- Packaging, destination and required inspection documents
The list stays in this browser until cleared. Adding a model does not send an enquiry.