CHSO / CABLE MANAGEMENT
Multi-hole & Flat Cable Glands
Bring separate round cables or a flat cable through one mounting entry using a seal matched to the cable profile. Select the insert geometry before choosing the final model.
PA66 body · NBR seal

01 / SELECTION LOGIC
Define the installation.
The thread size alone does not identify the correct sealing configuration.
Number of separate cables and outside diameter of each cable
For flat cable: width × thickness, corner profile and tolerances
Mounting thread or hole drawing, panel thickness and occupied seal holes
Quantity and required sealing test documentation
02 / DIMENSIONAL REFERENCE
Find your configuration.
41 configurations
Select by the complete row. Repeated nominal sizes can have different cable ranges or dimensions. Scroll tables horizontally on smaller screens.
Multi-hole and flat-entry configurations
| Entries | Model | Cable OD Range / Flat Opening (mm) | Thread O.D L2(mm) | Thread Length L1(mm) | Mounting Hole Diameter (mm) |
|---|---|---|---|---|---|
| 2 round entries | MG12A-H2-3 | 1-3 | 12 | 10 | 12-12.3 |
| 2 round entries | MG16A-H2-4 | 1.6-4 | 16 | 15 | 16-16.3 |
| 2 round entries | MG20A-H2-6 | 2.5-6 | 20 | 15 | 20-20.3 |
| 2 round entries | MG25A-H2-6 | 3-6 | 25 | 15 | 25-25.4 |
| 2 round entries | MG25A-H2-9 | 4.5-8.7 | 25 | 15 | 25-25.4 |
| 2 round entries | MG32A-H2-10 | 5-10 | 32 | 15 | 32-32.4 |
| 3 round entries | MG12A-H3-2 | 1.2-2.6 | 12 | 9 | 12-12.3 |
| 3 round entries | MG16A-H3-4 | 1.6-4 | 16 | 15 | 16-16.3 |
| 3 round entries | MG20A-H3-3 | 1.5-3.5 | 20 | 15 | 20-20.3 |
| 3 round entries | MG20A-H3-5 | 2-5 | 20 | 15 | 20-20.3 |
| 3 round entries | MG25A-H3-5 | 2-5 | 25 | 15 | 25-25.4 |
| 3 round entries | MG25A-H3-8 | 4-8 | 25 | 15 | 25-25.4 |
| 3 round entries | MG32A-H3-10 | 5-10 | 32 | 15 | 32-32.4 |
| 4 round entries | MG12A-H4-2 | 1-2.3 | 12 | 9 | 12-12.3 |
| 4 round entries | MG16A-H4-3 | 1.2-3 | 16 | 15 | 16-16.3 |
| 4 round entries | MG20A-H4-3 | 1.2-3 | 20 | 15 | 20-20.3 |
| 4 round entries | MG20A-H4-3.7 | 2-4.5 | 20 | 15 | 20-20.3 |
| 4 round entries | MG25A-H4-5 | 2-5 | 25 | 15 | 25-25.4 |
| 4 round entries | MG25A-H4-7 | 3.5-7 | 25 | 15 | 25-25.4 |
| 4 round entries | MG32A-H4-9 | 4.5-9 | 32 | 15 | 32-32.4 |
| 5 round entries | MG16A-H5-2 | 1-2.5 | 16 | 15 | 16-16.3 |
| 5 round entries | MG20A-H5-3 | 1.2-3 | 20 | 15 | 20-20.3 |
| 5 round entries | MG20A-H5-4 | 1.7-4.2 | 20 | 15 | 20-20.3 |
| 5 round entries | MG25A-H5-3 | 1.5-3.5 | 25 | 15 | 25-25.4 |
| 5 round entries | MG25A-H5-6 | 3-6 | 25 | 15 | 25-25.4 |
| 5 round entries | MG32A-H5-8 | 4-8 | 32 | 15 | 32-32.4 |
| 6 round entries | MG16A-H6-2 | 1-2 | 16 | 15 | 16-16.3 |
| 6 round entries | MG20A-H6-3 | 1.2-3 | 20 | 15 | 20-20.3 |
| 6 round entries | MG25A-H6-3 | 1.5-3.5 | 25 | 15 | 25-25.4 |
| 6 round entries | MG25A-H6-5 | 2.4-5.3 | 25 | 15 | 25-25.4 |
| 6 round entries | MG32A-H6-7 | 3.5-7 | 32 | 15 | 32-32.4 |
| Flat entry | MG16A-0610 | 6 × 10 | 16 | 15 | 16-16.3 |
| Flat entry | MG20A-0612 | 6.5 × 12 | 20 | 15 | 20-20.3 |
| Flat entry | MG20A-0614 | 6 × 14 | 20 | 15 | 20-20.3 |
| Flat entry | MG20A-0712 | 7 × 12 | 20 | 15 | 20-20.3 |
| Flat entry | MG20A-0714 | 7 × 14 | 20 | 15 | 20-20.3 |
| Flat entry | MG25A-0614 | 6 × 14 | 25 | 15 | 25-25.4 |
| Flat entry | MG25A-0714 | 7 × 14 | 25 | 15 | 25-25.4 |
| Flat entry | MG32A-0822 | 8 × 22 | 32 | 15 | 32-32.4 |
| Flat entry | MG40A-1028 | 10 × 28.5 | 40 | 20 | 40-40.3 |
| Flat entry | MG40A-0529 | 5.5 × 29 | 40 | 20 | 40-40.3 |
No matching configuration. Try another size or reset the filters.
TECHNICAL NOTES
Confirm before ordering.
- MG identifies a Metric-thread model. The mounting-hole column describes the panel opening, not the external body size.
- A flat opening code such as 0610 means 6 × 10 mm. Confirm the actual cable profile and tolerances; nominal width and thickness alone do not establish a seal.
- Unused holes require a verified closure method. Do not assume a multi-hole insert seals correctly with empty passages.
SELECTION SUPPORT
Common questions.
What does a flat-opening code such as 0610 mean?
It denotes a nominal 6 × 10 mm opening. Provide the actual cable width, thickness, tolerances and corner profile for seal selection.
Can I leave insert holes unused?
Unused passages require a verified closure arrangement. A multi-hole insert with open passages must not be assumed to retain the required seal.
Is mounting-hole diameter the gland body size?
No. It describes the enclosure opening. Body clearance, mounting thread and panel thickness must be checked separately.
SOURCING / QUOTATION
Send a clear specification.
Include the series or reference, quantities and installation requirements. Add the drawing, sample or documentation you need for approval.
Contact CHSO →Your enquiry checklist
- Number of separate cables and outside diameter of each cable
- For flat cable: width × thickness, corner profile and tolerances
- Mounting thread or hole drawing, panel thickness and occupied seal holes
- Quantity and required sealing test documentation