CHSO / CABLE MANAGEMENT
Stainless Steel Cable Glands
Stainless steel cable entries for equipment where corrosion exposure and cleaning conditions guide material selection. Use the selected Metric configurations below as a dimensional reference.
SS304 standard · SS316 option

01 / SELECTION LOGIC
Define the installation.
The thread size alone does not identify the correct sealing configuration.
Cable outside diameter and tolerance
Thread standard, size and panel thickness
Environment, sealing arrangement and required documents
Quantity by size, colour and accessory configuration
02 / DIMENSIONAL REFERENCE
Find your configuration.
33 configurations
Select by the complete row. Repeated nominal sizes can have different cable ranges or dimensions. Scroll tables horizontally on smaller screens.
Selected Metric configurations
| Metric Thread | Cable range (mm) | Thread OD (mm) | Thread length (mm) | Spanner size (mm) |
|---|---|---|---|---|
| M8×1 | 2-5 | 8 | 5 | 12 |
| M10×1 | 3-6.5 | 10 | 7 | 14 |
| M12×1.5 | 3-6.5 | 12 | 7 | 14 |
| M14×1.5 | 4-8 | 14 | 7 | 17 |
| M16×1.5 | 4-8 | 16 | 8 | 18 |
| M18×1.5 | 5-10 | 18 | 8 | 20 |
| M20×1.5 | 6-12 | 20 | 8 | 22 |
| M24×1.5 | 10-14 | 24 | 9 | 24/27 |
| M28×1.5 | 13-18 | 28 | 9 | 30 |
| M32×1.5 | 15-22 | 32 | 10 | 35 |
| M100×2 | 70-80 | 100 | 15 | 110 |
| PG Thread | Cable range (mm) | Thread OD (mm) | Thread length (mm) | Spanner size (mm) |
| PG7 | 3-6.5 | 12.5 | 7 | 14 |
| PG9 | 4-8 | 15.2 | 8 | 18 |
| PG11 | 5-10 | 18.6 | 8 | 20/21 |
| PG13.5 | 6-12 | 20.4 | 8 | 22 |
| PG16 | 10-14 | 22.5 | 9 | 24 |
| PG21 | 13-18 | 28.3 | 9 | 30/32 |
| PG63 | 42-52 | 72 | 15 | 78 |
| NPT Thread | Cable range (mm) | Thread OD (mm) | Thread length (mm) | Spanner size (mm) |
| NPT1/4 | 3-6.5 | 13.6 | 7 | 14 |
| NPT3/8 | 4-8 | 17 | 8 | 18 |
| NPT1/2 | 6-12 | 21.2 | 8 | 22 |
| NPT3/4 | 13-18 | 26.5 | 9 | 30 |
| NPT1 | 18-25 | 33.2 | 11 | 40 |
| NPT3 | 65-70 | 88.6 | 15 | 98 |
| G Thread | Cable range (mm) | Thread OD (mm) | Thread length (mm) | Spanner size (mm) |
| G1/4 | 3-6.5 | 13.1 | 7 | 14 |
| G3/8 | 4-8 | 16.6 | 8 | 18 |
| G1/2 | 6-12 | 20.9 | 8 | 22 |
| G3/4 | 13-18 | 26.4 | 9 | 30 |
| G1 | 18-25 | 33.2 | 11 | 40 |
| G3 | 65-70 | 87.8 | 15 | 94 |
No matching configuration. Try another size or reset the filters.
TECHNICAL NOTES
Confirm before ordering.
- Specify SS304 or SS316 with the chemical exposure and cleaning conditions; grade alone does not establish compatibility with every chemical.
- IP68 requires the specified sealing arrangement and correct installation. Seal material and temperature limits must be confirmed for the order.
- These are ordinary industrial cable glands. No hazardous-area or explosion-protection approval is implied.
SELECTION SUPPORT
Common questions.
Is SS316 supplied as standard?
SS304 is standard; SS316 is an option to specify with the order.
Does stainless steel make the entire gland chemical-resistant?
Body and seal compatibility must both be checked against the chemical, concentration, temperature and exposure time. Stainless grade alone does not establish suitability.
Can I select a different thread from the Metric table?
The table covers selected Metric configurations. For another thread standard, request a model-specific dimensional drawing and cable range.
SOURCING / QUOTATION
Send a clear specification.
Include the series or reference, quantities and installation requirements. Add the drawing, sample or documentation you need for approval.
Contact CHSO →Your enquiry checklist
- Cable outside diameter and tolerance
- Thread standard, size and panel thickness
- Environment, sealing arrangement and required documents
- Quantity by size, colour and accessory configuration