Type A / reverse-thread Type B
Releasable Cable Ties
Reopen and adjust a bundle during assembly or maintenance. Type A and Type B use different release-head designs; select the type together with its dimensions.
Technical overview
Configuration & material
- Material
- PA66 (nylon 6.6)
- Material flammability
- UL 94 V-2 grade
- Function
- Release tab allows reopening and reuse
- Head styles
- Type A RT; reverse-thread Type B RCT
Compare & select
Model selection
11 matching configurations
Dimensions are in millimetres unless stated. On smaller screens, scroll the tables horizontally.
No matching configuration. Clear the filters or send your required dimensions.
Type A — RT release head
| Model | Length L (mm) | Actual width W (mm) | Max. bundle Ø E (mm) | Min. loop tensile (lbf) | Approx. equivalent (N) | Enquiry |
|---|---|---|---|---|---|---|
| CS-5×200RT | 200 | 4.8 | 35 | 25 | 111 | |
| CS-8×150RT | 150 | 7.5 | 45 | 50 | 222 | |
| CS-8×200RT | 200 | 7.2 | 45 | 50 | 222 | |
| CS-8×250RT | 250 | 7.2 | 60 | 50 | 222 | |
| CS-8×300RT | 300 | 7.2 | 75 | 50 | 222 | |
| CS-8×400RT | 400 | 7.5 | 100 | 50 | 222 | |
| CS-8×450RT | 450 | 7.5 | 125 | 50 | 222 |
Type B — reverse-thread RCT head
| Model | Length L (mm) | Actual width W (mm) | Max. bundle Ø E (mm) | Min. loop tensile (lbf) | Approx. equivalent (N) | Enquiry |
|---|---|---|---|---|---|---|
| CS-8×350RCT | 350 | 7.2 | 90 | 100 | 445 | |
| CS-8×400RCT | 400 | 7.2 | 105 | 100 | 445 | |
| CS-8×450RCT | 450 | 7.2 | 118 | 100 | 445 | |
| CS-8×500RCT | 500 | 7.2 | 150 | 100 | 445 |
Product details
Outline & product views
Selection notes
- Leave access to the release tab after the tie has been installed.
- Use the millimetre dimensions for selection. The model suffix identifies the head type; RT and RCT are not interchangeable.
- Inspect the teeth and release head before reuse. Reuse is not a guarantee of an unlimited number of cycles.
- Tensile figures are minimum loop test values, not allowable working loads. Approximate newton figures are calculated from lbf; no separate kilogram-force rating is inferred.
Before you order
Product questions
Are RT and RCT the same head design?
No. RT uses the Type A release head; RCT is the reverse-thread Type B design. Select the complete suffix and check access to the release tab.
Model enquiry
Specify the configuration
Add models from the tables, complete the quantities and copy your list into the contact form.
Contact CHSO →Include with your request
- Model, product family and quantity in pieces or sets
- Colour, material grade and required operating conditions
- For metal ties: width, steel grade and bare or coated finish
- Packaging, destination and required inspection documents
The list stays in this browser until cleared. Adding a model does not send an enquiry.