Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryWhatsApp
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Lever connectors

CMK-61 Blue Lever Connectors

CMK-612 to CMK-615 are compact, transparent connectors with blue operating levers and two to five conductor entries. They serve common-potential splices where conductor cross-sections are no greater than 2.5 mm².

450 V AC32 A4 models
CMK-61 Blue Lever Connectors product examples
CMK-61 Blue Lever Connectors
Technical data

Electrical & connection specifications

CMK-61 Blue Lever Connectors — series specifications
ParameterSpecification
Rated voltage450 V AC
Rated current32 A
Rigid conductor range0.75–2.5 mm²
Flexible conductor range1.0–2.5 mm²
Strip length13 mm
Operating temperature−40 to +105 °C
Housing materialTransparent polycarbonate (PC)
Conductive partsTin-plated copper
Contact springAISI 301 stainless steel
Connection arrangementCommon-potential splice
Lever materialPOM (polyacetal)

Ratings apply to the listed connector configuration. The permissible circuit current also depends on conductor size, installation conditions and circuit protection. Use copper conductors.

Models & ordering

Choose the complete model code

Each model below has its own conductor-entry count. Electrical ratings are not multiplied by the number of entries.

CMK-61 Blue Lever Connectors — model selection
ModelConductor entriesInner pack (pcs)Carton (pcs)
CMK-61221006000
CMK-61331004000
CMK-61441004000
CMK-61551004000

4 models

Pack quantities describe standard packaging, not minimum order quantities. State the required quantity for each model in your inquiry.

Mechanical dimensions

Dimensions in millimetres

CMK-61 Blue Lever Connectors — housing dimensions
ModelDepth (mm)Width (mm)Height (mm)
CMK-61221.2139.5
CMK-61321.218.29.5
CMK-61421.223.59.5
CMK-61521.2299.5
Product reference

Dimensional drawings

Dimensioned model views in millimetres — CMK-61 Blue Lever Connectors
Application & installation

Match the wire and the electrical path

Select CMK-61 for conductors within its 2.5 mm² upper limit. Its 13 mm stripping requirement differs from the 11 mm used by CMK-63 and CMK-41.

Application fit

  • Compact junction boxes
  • Luminaire wiring assemblies
  • Equipment harness servicing

Preparation & connection

  1. Isolate the circuit and verify that it is de-energised.
  2. Use a conductor within the specified range; strip 13 mm without damaging the copper.
  3. Open the operating lever or spring tab, insert the conductor to the stop, then release or close the actuator.
  4. Use one conductor per entry. Check that no bare copper is exposed and gently pull each wire to check retention.
  5. Arrange the connector in an enclosure with appropriate wire support, then verify the intended circuit before energising.
Practical answers

Frequently asked questions

How do CMK-61 and CMK-63 differ?

CMK-61 accepts rigid wire from 0.75–2.5 mm² and flexible wire from 1.0–2.5 mm², with a 13 mm strip length. CMK-63 accepts larger rigid wire and uses an 11 mm strip length.

Is the connector reusable?

The lever opens the spring clamp so that a conductor can be removed and reinserted. Inspect the connector and the conductor before reuse.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include CMK-61 Blue Lever Connectors model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing
WhatsApp