PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Lever connectors

CMK-41 Lever Splicing Connectors

CMK-412 to CMK-415 are grey, orange-lever splicing connectors for two to five conductors. Each lever opens one spring clamp, making them suitable for connections that combine rigid wiring with flexible equipment leads.

450 V AC32 A4 models
CMK-41 Lever Splicing Connectors product examples
CMK-41 Lever Splicing Connectors
Technical data

Electrical & connection specifications

CMK-41 Lever Splicing Connectors — series specifications
ParameterSpecification
Rated voltage450 V AC
Rated current32 A
Rigid conductor range0.2–4 mm²
Flexible conductor range0.08–2.5 mm²
Strip length11 mm
Operating temperature−20 to +85 °C
Housing materialPolyamide PA66
Conductive partsTin-plated copper
Contact springAISI 301 stainless steel
Connection arrangementCommon-potential splice
Lever materialPolyamide PA66

Ratings apply to the listed connector configuration. The permissible circuit current also depends on conductor size, installation conditions and circuit protection. Use copper conductors.

Models & ordering

Choose the complete model code

Each model below has its own conductor-entry count. Electrical ratings are not multiplied by the number of entries.

CMK-41 Lever Splicing Connectors — model selection
ModelConductor entriesInner pack (pcs)Carton (pcs)
CMK-41221004000
CMK-41331004000
CMK-4144502000
CMK-4155502000

4 models

Pack quantities describe standard packaging, not minimum order quantities. State the required quantity for each model in your inquiry.

Mechanical dimensions

Dimensions in millimetres

CMK-41 Lever Splicing Connectors — housing dimensions
ModelDepth (mm)Width (mm)Height (mm)
CMK-41221.812.814.4
CMK-41321.817.214.4
CMK-41422.322.314.6
CMK-41521.826.414.4
Product reference

Dimensional drawings

Dimensioned model views in millimetres — CMK-41 Lever Splicing Connectors
Application & installation

Match the wire and the electrical path

Choose two, three, four or five entries according to the number of conductors on the same potential. Check the flexible-wire limit separately; a 4 mm² rigid-wire rating does not make 4 mm² flexible wire suitable.

Application fit

  • Lighting and equipment connections
  • Mixed rigid and flexible copper wiring
  • Serviceable junction-box splices

Preparation & connection

  1. Isolate the circuit and verify that it is de-energised.
  2. Use a conductor within the specified range; strip 11 mm without damaging the copper.
  3. Open the operating lever or spring tab, insert the conductor to the stop, then release or close the actuator.
  4. Use one conductor per entry. Check that no bare copper is exposed and gently pull each wire to check retention.
  5. Arrange the connector in an enclosure with appropriate wire support, then verify the intended circuit before energising.
Practical answers

Frequently asked questions

What is the difference between CMK-412 and CMK-415?

CMK-412 has two conductor entries and CMK-415 has five. Both use the same 450 V AC, 32 A series rating and 11 mm strip length.

Does each lever represent an isolated circuit?

No. These are common-potential splicing connectors. All entries in one connector belong to the same splice.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include CMK-41 Lever Splicing Connectors model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing