Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryWhatsApp
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Copper connectors

GT-1 Through-Bore Copper Connectors

T2 copper connecting tubes with a through bore, covering 10–630 mm². Suitable for planned straight joints where insertion depth is controlled during assembly.

10–630 mm²T2 copperCompression connection
GT-1 Through-Bore Copper Connectors
GT-1 · Copper connectors
Technical data

Material, connection & construction

GT-1 product specifications
ParameterSpecification
SeriesGT-1
Product formThrough-Bore Copper Connectors
Conductor / interfaceCopper-to-copper conductor joint
Body materialT2 copper
Size range10–630 mm²
Connection methodCompression joint
InsulationNon-insulated; provide application-specific joint insulation and enclosure protection
DimensionsMillimetres; conductor cross-section in mm²
Finish optionsBare copper / tinned copper; specify the required finish
Model selection

Models & dimensions

All dimensional values are in millimetres. Conductor sizes are in mm². Use the symbols in the drawing for the selected construction.

GT-1 Through-Bore Copper Connectors construction
Product construction
GT-1 Through-Bore Copper Connectors dimension symbols
Dimensional geometry · All dimensions in mm
Use the dimension symbols in this series drawing; symbols can differ between constructions.

GT-1 model dimensions
ModelTube OD DTube ID dOverall length L
GT-1-108552
GT-1-169656
GT-1-2510760
GT-1-3511864
GT-1-50131072
GT-1-70161278
GT-1-95181385
GT-1-120201590
GT-1-1502317100
GT-1-1852519105
GT-1-2402721110
GT-1-3003124130
GT-1-4003426150
GT-1-5003830170
GT-1-6304535190
Application & installation

Select the complete connection

Application fit

  • Straight cable joints and copper-wire splices in protected installations
  • Panel maintenance and planned cable extensions
  • Equipment wiring where the compression joint is insulated and mechanically supported

Ordering checklist

Specify GT-1 construction, conductor material and nominal section, conductor strand class, both conductor sizes, joint space, tool/die system, quantity and required finish.

Installation sequence

  1. Isolate the circuit and verify that it is de-energised. Identify the conductor material, section and strand construction.
  2. Select the matching connector, tool and die combination. Strip to the required insertion length without cutting or losing strands.
  3. Insert the conductor fully and crimp in the sequence and number of compressions specified for the connector/tool system. Do not substitute a die solely because its size marking looks similar.
  4. Inspect the compression, conductor retention and contact alignment. Restore suitable insulation and protection, then carry out the assembly checks before energising.
Practical answers

Frequently asked questions

What distinguishes GT-1 from other cable connectors?

T2 copper connecting tubes with a through bore, covering 10–630 mm². Suitable for planned straight joints where insertion depth is controlled during assembly.

How do I select the correct GT-1 size?

Specify GT-1 construction, conductor material and nominal section, conductor strand class, both conductor sizes, joint space, tool/die system, quantity and required finish.

Does the conductor size determine a universal current rating?

No. Connection current depends on the cable material and size, insulation temperature, terminal interface, installation conditions and verified crimp system. Select the whole circuit and connection together.

Can I use any crimping die with the same size number?

No. Die profile, tool force, connector wall thickness and conductor construction work as a system. Use the specified tool/die combination for the chosen connector.

Does this connector provide electrical insulation?

No. These are conductive connection components. Provide the joint insulation, sealing and mechanical protection required by the cable system and installation.

Distributor & panel-builder inquiries

Specify the conductor.
Match the connection.

Include GT-1 model and construction, conductor material and size, stud-hole or joint requirements, quantities and packaging needs.

Request pricing ↗
WhatsApp