Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryWhatsApp
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Push-in connectors

CMK-20 Transparent Push-in Connectors

CMK-202 to CMK-208 connect two, three, four, five, six or eight rigid conductors. The compact transparent body supports visual inspection, with single-row and two-row entry layouts to suit different wire counts.

450 V AC24 A6 models
CMK-20 Transparent Push-in Connectors product examples
CMK-20 Transparent Push-in Connectors
Technical data

Electrical & connection specifications

CMK-20 Transparent Push-in Connectors — series specifications
ParameterSpecification
Rated voltage450 V AC
Rated current24 A
Rigid conductor range0.5–2.5 mm²
Flexible conductor rangeRigid conductors only
Strip length11 mm
Operating temperature−40 to +85 °C
Housing materialTransparent polycarbonate (PC)
Conductive partsTin-plated copper
Contact springAISI 301 stainless steel
Connection arrangementCommon-potential splice

Ratings apply to the listed connector configuration. The permissible circuit current also depends on conductor size, installation conditions and circuit protection. Use copper conductors.

Models & ordering

Choose the complete model code

Each model below has its own conductor-entry count. Electrical ratings are not multiplied by the number of entries.

CMK-20 Transparent Push-in Connectors — model selection
ModelConductor entriesVersion / colourInner pack (pcs)Carton (pcs)
CMK-2022Red1006000
CMK-2033Orange1006000
CMK-2044Yellow1006000
CMK-2055Grey503000
CMK-2066Purple503000
CMK-2088Blue503000

6 models

Pack quantities describe standard packaging, not minimum order quantities. State the required quantity for each model in your inquiry.

Mechanical dimensions

Dimensions in millimetres

CMK-20 Transparent Push-in Connectors — housing dimensions
ModelDepth (mm)Width (mm)Height (mm)
CMK-20216.59.66.1
CMK-20316.513.66.1
CMK-20416.517.66.1
CMK-20516.521.66.1
Product reference

Dimensional drawings

Dimensioned model views in millimetres — CMK-20 Transparent Push-in Connectors
Application & installation

Match the wire and the electrical path

Choose the number of wire entries and allow room for the wiring to approach without pulling sideways on the connector. All entries within one connector form a common-potential splice.

Application fit

  • Multi-wire rigid-conductor splices
  • Lighting branches inside junction boxes
  • Compact wiring distribution

Preparation & connection

  1. Isolate the circuit and verify that it is de-energised.
  2. Use a conductor within the specified range; strip 11 mm without damaging the copper.
  3. Insert the rigid conductor fully into the spring entry.
  4. Use one conductor per entry. Check that no bare copper is exposed and gently pull each wire to check retention.
  5. Arrange the connector in an enclosure with appropriate wire support, then verify the intended circuit before energising.
Practical answers

Frequently asked questions

Which model has eight wire entries?

CMK-208 has eight conductor entries arranged in two rows.

Can these connectors replace an insulated multi-pole terminal block?

A common-potential splice joins its entries together. Use a terminal arrangement with separate paths when the circuit requires electrically isolated connections.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include CMK-20 Transparent Push-in Connectors model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing
WhatsApp