PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Push-in connectors

CMK-25 Compact Push-in Connectors

CMK-252, CMK-253, CMK-254 and CMK-255 make compact two- to five-wire splices for rigid copper conductors. Colour-coded transparent versions and grey X versions provide the same port-count choices.

450 V AC24 A8 models
CMK-25 Compact Push-in Connectors product examples
CMK-25 Compact Push-in Connectors
Technical data

Electrical & connection specifications

CMK-25 Compact Push-in Connectors — series specifications
ParameterSpecification
Rated voltage450 V AC
Rated current24 A
Rigid conductor range0.75–2.5 mm²
Flexible conductor rangeRigid conductors only
Strip length11 mm
Operating temperature−40 to +85 °C
Housing materialTransparent polycarbonate (transparent versions)
Conductive partsTin-plated copper
Contact springAISI 301 stainless steel
Connection arrangementCommon-potential splice

Ratings apply to the listed connector configuration. The permissible circuit current also depends on conductor size, installation conditions and circuit protection. Use copper conductors.

Models & ordering

Choose the complete model code

Each model below has its own conductor-entry count. Electrical ratings are not multiplied by the number of entries.

CMK-25 Compact Push-in Connectors — model selection
ModelConductor entriesVersion / colourInner pack (pcs)Carton (pcs)
CMK-2522Red1006000
CMK-252X2GreyBy orderBy order
CMK-2533Orange1006000
CMK-253X3GreyBy orderBy order
CMK-2544Yellow1004000
CMK-254X4GreyBy orderBy order
CMK-2555Grey1004000
CMK-255X5GreyBy orderBy order

8 models

Pack quantities describe standard packaging, not minimum order quantities. State the required quantity for each model in your inquiry.

Mechanical dimensions

Dimensions in millimetres

CMK-25 Compact Push-in Connectors — housing dimensions
ModelDepth (mm)Width (mm)Height (mm)
CMK-25219.710.59.5
CMK-25319.713.69.5
CMK-25419.717.49.5
CMK-25519.7219.5
Product reference

Dimensional drawings

Dimensioned model views in millimetres — CMK-25 Compact Push-in Connectors
Application & installation

Match the wire and the electrical path

Use rigid conductors in the stated range. This series has no release lever; choose a lever-operated series when flexible leads or frequent disconnection are required. Colour is a model identifier, not a circuit-voltage rating.

Application fit

  • Rigid-wire junction-box splices
  • Lighting circuit branches
  • Space-limited enclosure wiring

Preparation & connection

  1. Isolate the circuit and verify that it is de-energised.
  2. Use a conductor within the specified range; strip 11 mm without damaging the copper.
  3. Insert the rigid conductor fully into the spring entry.
  4. Use one conductor per entry. Check that no bare copper is exposed and gently pull each wire to check retention.
  5. Arrange the connector in an enclosure with appropriate wire support, then verify the intended circuit before energising.
Practical answers

Frequently asked questions

Can CMK-25 accept fine-stranded wire?

The specified range is for rigid wire. Use a lever-operated connector with an appropriate flexible-wire range for fine-stranded leads.

What does the X suffix mean?

CMK-252X, CMK-253X, CMK-254X and CMK-255X identify the grey housing variants.

How are the ports connected?

Each connector forms a single common-potential splice. Separate electrical potentials require separate connectors.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include CMK-25 Compact Push-in Connectors model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing