Equipment-side surge protection
BY1-D Surge Protective Devices
Compare BY1-D/2 and BY1-D/4 configuration references for equipment-side surge protection. Specify the continuous voltage and alarm or remote-contact requirement in the enquiry.
At a glance
Specifications & model comparison
- Maximum discharge current Imax
- 10 kA (8/20 µs)
- Nominal discharge current In
- 5 kA (8/20 µs)
- Protection level Up
- ≤1.0 kV
- Material
- PBT
- Ambient temperature
- −40 to +80 °C
| Configuration | Standard reference | Alarm reference | Remote-contact reference | Enquiry |
|---|---|---|---|---|
| BY1-D/2 | BY1-D/2-320 | BY1-D/2-320B | BY1-D/2-320X | Select for RFQ → |
| BY1-D/4 | BY1-D/4-320 | BY1-D/4-320B | BY1-D/4-320X | Select for RFQ → |
Include the required pole count, electrical configuration and accessories in your enquiry. Configuration descriptions do not replace the complete ordering code.
Before ordering
Specify the configuration
- Specify the supply voltage, earthing system, pole arrangement, installation position and backup protection.
- Use the individual voltage and discharge-current ratings rather than choosing only by the largest kA value.
- The legacy B/C/D designation is not used here as proof of a current Type 1/2/3 classification; state the required tested classification and documentation in the enquiry.
- Isolate the circuit and follow the installation instructions for maintenance or replacement.
- Include the required continuous operating voltage explicitly with the configuration reference.
Selection questions
Practical answers for purchasing
What distinguishes the B and X ordering suffixes?
The listed B suffix identifies the alarm model; X identifies the remote-contact model. Select the exact configuration and voltage together.
Request a quote
Build a clear enquiry.
Select a series and add the electrical details your purchasing team needs confirmed.
This tool prepares enquiry text. Copy the summary and send it through our contact page.
Contact CHSO →