Power-circuit surge protection
BY4 Surge Protective Devices
Compare BY4-60, BY4-80 and BY4-100 by continuous voltage, protection level and 8/20 µs discharge-current ratings.
At a glance
Specifications & model comparison
- Rated voltage Un
- 220/380 V
- Maximum continuous voltage Uc
- 385 V
- Response time
- <25 ns
- Protection degree
- IP20
- Ambient temperature
- −40 to +80 °C
| Model | In, 8/20 µs (kA) | Imax, 8/20 µs (kA) | Protection level Up (kV) | Enquiry |
|---|---|---|---|---|
| BY4-60 | 30 | 60 | ≤2.0 | Select for RFQ → |
| BY4-80 | 40 | 80 | ≤2.5 | Select for RFQ → |
| BY4-100 | 60 | 100 | ≤3.0 | Select for RFQ → |
Include the required pole count, electrical configuration and accessories in your enquiry. Configuration descriptions do not replace the complete ordering code.
Before ordering
Specify the configuration
- Specify the supply voltage, earthing system, pole arrangement, installation position and backup protection.
- Use the individual voltage and discharge-current ratings rather than choosing only by the largest kA value.
- The legacy B/C/D designation is not used here as proof of a current Type 1/2/3 classification; state the required tested classification and documentation in the enquiry.
- Isolate the circuit and follow the installation instructions for maintenance or replacement.
- Include the required impulse-current waveform and test classification when specifying coordinated lightning protection.
Selection questions
Practical answers for purchasing
Does a higher Imax also mean a lower protection level?
No. In this range the listed protection level Up differs between models. Compare both discharge capacity and voltage protection level.
Request a quote
Build a clear enquiry.
Select a series and add the electrical details your purchasing team needs confirmed.
This tool prepares enquiry text. Copy the summary and send it through our contact page.
Contact CHSO →