PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Inline connectors

CMK-42 Inline & Branch Connectors

The CMK-42 range routes conductors through opposing entry sides. Straight-through versions cover one to five conductor paths, while branch versions provide one-to-many or two-input distribution arrangements.

450 V AC32 A9 models
CMK-42 Inline & Branch Connectors product examples
CMK-42 Inline & Branch Connectors
Technical data

Electrical & connection specifications

CMK-42 Inline & Branch Connectors — series specifications
ParameterSpecification
Rated voltage450 V AC
Rated current32 A
Rigid conductor range0.2–4 mm²
Flexible conductor range0.08–2.5 mm²
Strip length11 mm
Operating temperature−40 to +105 °C
Housing materialPolycarbonate (PC)
Conductive partsTin-plated copper
Contact springAISI 301 stainless steel
Connection arrangementInline or branch arrangement, selected by model
Lever materialPolyamide PA66

Ratings apply to the listed connector configuration. The permissible circuit current also depends on conductor size, installation conditions and circuit protection. Use copper conductors.

Models & ordering

Choose the complete model code

Each model below has its own conductor-entry count. Electrical ratings are not multiplied by the number of entries.

CMK-42 Inline & Branch Connectors — model selection
ModelConductor entriesArrangementInner pack (pcs)Carton (pcs)
CMK-40121 in / 1 out503000
CMK-42242 in / 2 out501500
CMK-42363 in / 3 out501200
CMK-42484 in / 4 out501000
CMK-425105 in / 5 out501800
CMK-422-462 in / 4 out503000
CMK-422-682 in / 6 out503000
CMK-421-231 in / 2 out503000
CMK-421-341 in / 3 out503000

9 models

Pack quantities describe standard packaging, not minimum order quantities. State the required quantity for each model in your inquiry.

Product reference

Branch model identification

Branch model identification — CMK-42 Inline & Branch Connectors
Application & installation

Match the wire and the electrical path

First choose the input/output arrangement, then check the conductor range. Port count describes conductor entries, not isolated circuit count. Keep the required electrical paths separate and check continuity against the intended circuit before energising.

Application fit

  • Inline equipment wire extensions
  • Luminaire wiring distribution
  • Organised branch wiring inside enclosures

Preparation & connection

  1. Isolate the circuit and verify that it is de-energised.
  2. Use a conductor within the specified range; strip 11 mm without damaging the copper.
  3. Open the operating lever or spring tab, insert the conductor to the stop, then release or close the actuator.
  4. Use one conductor per entry. Check that no bare copper is exposed and gently pull each wire to check retention.
  5. Arrange the connector in an enclosure with appropriate wire support, then verify the intended circuit before energising.
Practical answers

Frequently asked questions

Which models provide a one-to-many branch?

CMK-421-2 provides a 1-in / 2-out arrangement; CMK-421-3 provides 1-in / 3-out.

How do CMK-422 and CMK-422-4 differ?

CMK-422 has four entries arranged 2 in / 2 out. CMK-422-4 has six entries arranged 2 in / 4 out.

Is the 32 A rating multiplied by the number of outputs?

No. Port count does not multiply the permissible current. Size the circuit for the connector rating, connected conductor and combined load in any shared path.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include CMK-42 Inline & Branch Connectors model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing