PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Compact & Special Layouts

CS808 Copper Comb Busbar

CS808 copper comb busbar for CJX2-format contactor layouts, with a 13 mm² conductor section and a 63 A rating.

63 A13 mm²CJX2 contactor layout
CS808 Copper Comb Busbar
CS808 · Compact & Special Layouts
Technical data

Product specifications

Choose CS808 by its dimensioned terminal pattern. Compare the fork or contact profile, group span, terminal heights and phase sequence with the connected device; a similar model-family name alone is not enough.

CS808 technical specifications
ParameterSpecification
Product familyCS808
ConductorCopper
Nominal voltage415 V
Maximum operating voltage500 V
Impulse voltage4 kV
Rated current63 A
Connection arrangementSee the pole layout and terminal geometry for each configuration
Model selection

Ratings, contact patterns & dimensions

All dimensions are in millimetres unless stated otherwise. Conductor cross-section is in mm²; the model-table width is distinct from contact tooth width.

CS808 · CJX2 contactor layout

CS808 · CJX2 contactor layout copper busbar
CS808 · CJX2 contactor layout product configuration
CS808 · CJX2 contactor layout dimensional drawing and contact arrangement
Contact geometry · Dimensions in mm
CS808 · CJX2 contactor layout model ratings
Ordering modelCopper thickness (mm)Cross-section (mm²)Rated current (A)Conductor width (mm)
CS8081.213639
Layout designation
CJX2 contactor layout
Contact-group span
45 mm
Fork outer dimension
8.3 mm
Fork opening
3.52 mm
Contact tip dimension
2.35 mm
Application & installation

Fit the complete device row

Application fit

  • Power interconnection of matching CJX2-format contactor groups
  • Panel assemblies with the specific CS808 connection geometry

Ordering checklist

Choose CS808 by its dimensioned terminal pattern. Compare the fork or contact profile, group span, terminal heights and phase sequence with the connected device; a similar model-family name alone is not enough.

Include quantities, destination and packaging requirements. For a replacement, identify the connected devices and the full contact sequence.

Installation sequence

  1. Isolate the supply and verify that the assembly is de-energised.
  2. Check the device lineup, phase and neutral sequence, contact positions and insulating profile.
  3. Use the specified finished length. Where the selected design permits cutting, remove swarf and burrs and refit matching end insulation.
  4. Seat contacts fully in the intended terminal openings and tighten to the connected device manufacturer’s specified torque.
  5. Protect unused exposed contacts, inspect end caps and verify continuity, separation of poles and conductor retention before energising.
Practical answers

Frequently asked questions

How do I specify CS808?

Choose CS808 by its dimensioned terminal pattern. Compare the fork or contact profile, group span, terminal heights and phase sequence with the connected device; a similar model-family name alone is not enough.

Does matching the pitch guarantee compatibility?

No. Match the terminal opening, tooth height and width, pole sequence, device spacing and insulation profile. A matching pitch alone does not establish compatibility.

What determines the usable current in the assembled panel?

Use the listed model rating together with the limits of the feeder connection, connected devices and enclosure conditions. Each pole carries its own load; tooth count does not multiply the current rating.

What information belongs in an order?

Include the full model code, layout designation, required length or tooth count, matching device series, quantity and end-cap requirements.

Distributor & panel-builder inquiries

Specify the layout.
Get the right connection.

Include CS808 model and layout, required length or tooth count, matching device series, quantities and end-cap requirements.

Request pricing ↗