Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryWhatsApp
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Disconnect / MDD SERIES

MDD Insulated Male Disconnects

MDD male disconnects terminate copper wires with a flat blade that mates with a female receptacle. Select the blade dimensions first, then the conductor range and insulation color.

0.5–6 mm²9 variantsPVC
View model dimensions ↓
MDD Insulated Male Disconnects
PRODUCT SPECIFICATION

Built around your connection.

Conductor range
0.5–6 mm²
Conductor
Copper wire
Contact material
Brass
Insulation
PVC
Connection
Disconnect
Variants
9

Selection essentials

Match the flat blade to an FDD, FDFD or other receptacle with the same tab width and thickness.

Typical applications

Appliance wiring, control equipment and components fitted with matching flat-tab connections.

COMPLETE MODEL TABLE

MDD dimensions & wire sizes.

MDD terminal dimensional drawing
MDD dimensional reference

Read the dimensions before selecting.

Match the flat blade to an FDD, FDFD or other receptacle with the same tab width and thickness.

All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.

9 model variants

MDD Insulated Male Disconnects — model dimensions and conductor selection
ModelWire mm²AWGColorImax ATab t × w mmMetal T mmWidth B mmBore d mmOuter D mmL mmH mm
MDD1.25-110(5)0.5–1.522–16Red100.5×2.80.52.81.74.317.710
MDD1.25-110(8)0.5–1.522–16Red100.8×2.80.82.81.74.317.710
MDD1.25-187(5)0.5–1.522–16Red100.5×4.750.54.751.74.32010
MDD1.25-187(8)0.5–1.522–16Red100.8×4.750.84.751.74.32010
MDD1.25-2500.5–1.522–16Red100.8×6.350.4×26.351.74.32110
MDD2-187(5)1.5–2.516–14Blue150.5×4.750.54.752.34.32010
MDD2-187(8)1.5–2.516–14Blue150.8×4.750.84.752.34.32010
MDD2-2501.5–2.516–14Blue150.8×6.350.4×26.352.34.32110
MDD5.5-2504–612–10Yellow240.8×6.350.4×26.353.45.72513

Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.

AWG and kcmil values are size references, not exact conversions of every metric cross-section.

Imax is the terminal size reference limit. The permissible circuit current also depends on wire size, ambient temperature, crimp quality and the mating terminal; use the lowest applicable limit.

ASSEMBLY GUIDE

A suitable terminal needs a suitable crimp.

01 / Match

Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.

02 / Prepare

Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.

03 / Crimp

Use a die intended for this terminal construction and the selected wire size. Complete the tool’s crimp cycle.

04 / Inspect

Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.

MDD questions answered.

What is the MDD series used for?

MDD male disconnects terminate copper wires with a flat blade that mates with a female receptacle. Select the blade dimensions first, then the conductor range and insulation color.

How do I choose a MDD model?

Match the flat blade to an FDD, FDFD or other receptacle with the same tab width and thickness.

Can I select the terminal by insulation color alone?

No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.

How should the terminal be crimped?

Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.

Does full insulation make a disconnect waterproof?

No. An insulating sleeve covers conductive parts but is not a sealed housing. Use an enclosure or a specified sealed connector where moisture protection is required.

COMPARE CONNECTION OPTIONS

Related terminal families.

BUILD YOUR TERMINAL ORDER

Specify your MDD models.

Send the complete model codes, quantities, conductor sizes and destination country.

Enquire with CHSO →
WhatsApp