PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Bullet / MPD SERIES

MPD Male Bullet Connectors

MPD male bullet connectors provide a detachable round-pin connection for copper-wire harnesses. Match the 4 mm or 5 mm bullet diameter to an FRD female connector, then select the barrel for the conductor size.

0.5–6 mm²4 variantsPVC
View model dimensions ↓
MPD Male Bullet Connectors
PRODUCT SPECIFICATION

Built around your connection.

Conductor range
0.5–6 mm²
Conductor
Copper wire
Contact material
Brass
Insulation
PVC
Connection
Bullet
Variants
4

Selection essentials

Match MPD with FRD by bullet diameter. A 4 mm male bullet is not interchangeable with a 5 mm socket.

Typical applications

Detachable wire harnesses, serviceable control wiring and equipment subassemblies.

COMPLETE MODEL TABLE

MPD dimensions & wire sizes.

MPD terminal dimensional drawing
MPD dimensional reference

Read the dimensions before selecting.

Match MPD with FRD by bullet diameter. A 4 mm male bullet is not interchangeable with a 5 mm socket.

All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.

4 model variants

MPD Male Bullet Connectors — model dimensions and conductor selection
ModelWire mm²AWGColorImax AT mmBullet Ø mmF mmBarrel bore mmH mmL mm
MPD1.25-1560.5–1.522–16Red100.44111.71021
MPD2-1561.5–2.516–14Blue150.44112.31021
MPD2-1951.5–2.516–14Blue150.45112.31021
MPD5.5-1954–612–10Yellow240.45123.41325

Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.

AWG and kcmil values are size references, not exact conversions of every metric cross-section.

Imax is the terminal size reference limit. The permissible circuit current also depends on wire size, ambient temperature, crimp quality and the mating terminal; use the lowest applicable limit.

ASSEMBLY GUIDE

A suitable terminal needs a suitable crimp.

01 / Match

Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.

02 / Prepare

Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.

03 / Crimp

Use a die intended for this terminal construction and the selected wire size. Complete the tool’s crimp cycle.

04 / Inspect

Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.

MPD questions answered.

What is the MPD series used for?

MPD male bullet connectors provide a detachable round-pin connection for copper-wire harnesses. Match the 4 mm or 5 mm bullet diameter to an FRD female connector, then select the barrel for the conductor size.

How do I choose a MPD model?

Match MPD with FRD by bullet diameter. A 4 mm male bullet is not interchangeable with a 5 mm socket.

Can I select the terminal by insulation color alone?

No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.

How should the terminal be crimped?

Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.

What should I include in an enquiry?

List the complete MPD model code, quantity and conductor size. Add the stud, tab, pin or barrel dimensions relevant to your installation and your destination country.

COMPARE CONNECTION OPTIONS

Related terminal families.

BUILD YOUR TERMINAL ORDER

Specify your MPD models.

Send the complete model codes, quantities, conductor sizes and destination country.

Enquire with CHSO →