Reinforced nylon construction.
The C200 uses a glass-fibre-reinforced nylon housing. The illustrated handset includes a protective outer sleeve and silicone function buttons.
CHSO / INDUSTRIAL WIRELESS CONTROLS
A compact 433 MHz transmitter and receiver system for crane and electric-hoist control projects. Compare the standard C200 data, then choose the required receiver supply and kit configuration.

MODEL-SPECIFIC TECHNICAL DATA
Standard C200 transmitter and receiver data are listed separately below. Choose receiver supply and kit contents in Order configurations.
| Parameter | Specification |
|---|---|
| Model | C200 |
| Radio frequency | 433 MHz |
| Transmitting power | ≤10 dBm |
| Transmitter power | 2 × AA alkaline batteries |
| Housing | Glass-fibre-reinforced nylon |
| Security code | 32-bit |
| Operating temperature | −35 °C to +80 °C |
| Control distance | Up to 100 m; actual range depends on site conditions |
| Dimensions (L × W × D) | 148 × 76 × 24 mm |
| Approximate weight | 320 g |
| Parameter | Specification |
|---|---|
| Model | C200 |
| Radio frequency | 433 MHz |
| Housing | Glass-fibre-reinforced nylon |
| Declared enclosure protection | IP66 |
| Security code | 32-bit |
| Receiver sensitivity | −110 dBm |
| Dimensions (W × H × D) | 90 × 90 × 50 mm |
| Approximate weight | 630 g |
| Receiver supply options | 36 / 220 / 380 V AC |
Dimensions and weights are approximate. IP66 describes the receiver enclosure; it does not extend to the complete installed control system.
Download C200 specification table (CSV) ↓ORDER CONFIGURATIONS
For a new installation, start with one transmitter and one receiver, then select the receiver supply. For a spare handset, choose transmitter only and include the existing receiver label. Two-transmitter and rechargeable kits are separate configurations.
| Ref. | Model | Supply configuration | Receiver voltage | Order note |
|---|---|---|---|---|
| 1 | C200 | 1 transmitter + 1 receiver | 36 V AC | Standard kit |
| 2 | C200 | 1 transmitter + 1 receiver | 220 V AC | Standard kit |
| 3 | C200 | 1 transmitter + 1 receiver | 380 V AC | Standard kit |
| 13 | C200 | 2 transmitters + 1 receiver | Specify when enquiring | Describe how the two transmitters will be used |
| 17 | C200 | 1 transmitter + 1 receiver | Specify when enquiring | Rechargeable transmitter version |
| 21 | C200 / C400 | Replacement housing | Not applicable | Include a housing photo and the part required |
| 22 | C200 | Transmitter only | Receiver supply not included | Include the receiver label and channel code |
FUNCTION & INTEGRATION
The C200 uses a glass-fibre-reinforced nylon housing. The illustrated handset includes a protective outer sleeve and silicone function buttons.
The C200 specification lists wireless pairing, selectable RF channels and a 32-bit security code. Use the pairing instructions for the receiver version when adding or replacing a transmitter.
Button actions, interlocks and RF channels are configurable through the PC interface described for C200. Include the desired actions in your inquiry; software and programming-cable requirements belong with the selected receiver version.
Include the receiver-label photograph, serial number and channel code. These identify the version needed for pairing and the correct wiring information; the C200 model name alone does not identify the control outputs.
KIT CONTENTS
The illustrated set shows one transmitter, one receiver, dust cover, protective sleeve, QC certificate, user manual, accessories and function labels.
The packing list follows the kit you choose. For a rechargeable version, include the battery and charging accessories in the requested package.

CONFIGURATION BRIEF
List motions, start/stop functions, operating stages and interlocks.
State the supply voltage, AC/DC type and required control outputs.
Provide the equipment drawing, installation conditions and destination.
Identify required technical files, accessories, quantities and packaging.
SELECTION QUESTIONS
C200 is a handheld radio control for crane and electric-hoist control projects. Start with the required motions and speed stages, then match the receiver supply and outputs to the equipment control circuit.
The standard C200 transmitter uses two AA alkaline batteries. A rechargeable transmitter is a separate kit version, with its own battery and charging accessories.
Up to 100 m is the stated C200 control distance. Metal structures, obstacles, antenna placement and radio conditions affect the usable range at an installation.
IP66 is the stated enclosure protection for the C200 receiver. It does not describe the transmitter, the complete installation or immersion protection. Project documentation should name the receiver version covered.
C200 supports wireless pairing. For a replacement handset, include the existing receiver label, serial number and channel code so the pairing procedure and output configuration match that receiver.
Start with C200 quantity, kit choice and receiver supply. Add the required control functions and destination. Include a receiver-label photo for replacements, or the control drawing for a new installation.
TECHNICAL ENQUIRY
Share the required motions, receiver supply and equipment interface with your model and quantity.
Contact CHSO →Prepare your notes here, then include them with your enquiry.