PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
UKK Distribution Blocks

UKK500A Power Distribution Block

UKK500A single-pole power distribution block: 500 A, laminated busbar input and 11 branch outputs under a transparent cover.

500 A11 outputsSingle pole
UKK500A Power Distribution Block
UKK500A · UKK Distribution Blocks
Technical data

Product specifications

UKK500A technical specifications
ParameterSpecification
Product modelUKK500A
Rated current500 A
Rated insulation voltage (Ui)690 V
Electrical arrangementOne common potential / single pole
Main connectionFlat laminated copper busbar
Branch outputs11
Conductor materialNickel-plated copper
Insulating housingFlame-retardant PVC
CoverTransparent polycarbonate
MountingDIN rail or screw fixing
Overall dimensions H × D × W96 × 50 × 49 mm
Mounting centres85 × 29 mm
Connections & dimensions

Conductor entries & tightening torque

UKK500A selection table
ConnectionEntriesConductor / busbar sizeTorque (N·m)
Main input14 × 15.5 × 0.8 to 8 × 24 × 1 mm stack10
Branch outputs26–35 mm² bare / 6–25 mm² with ferrule4.4
Branch outputs52.5–16 mm²2.7
Branch outputs42.5–10 mm²2.7

Connection torque varies with entry size. Ui is an insulation parameter; select the complete installation for its operating voltage and protection requirements.

Laminated busbar input options

UKK500A — Laminated busbar input options
Lamellae × width × thickness (mm)
4 × 15.5 × 0.8
2 × 20 × 1
3 × 20 × 1
4 × 20 × 1
5 × 20 × 1
6 × 20 × 1
2 × 24 × 1
3 × 24 × 1
4 × 24 × 1
5 × 24 × 1
6 × 24 × 1
8 × 24 × 1
Additional product reference image
UKK500A original product reference
Application & installation

Select for the complete panel

Choose UKK500A for a flat laminated busbar feeder; UKK400A is the round-cable input alternative. Keep the sum of branch currents within the block rating and coordinate each branch with conductor size and protective devices.

Application fit

  • Feeder branching in low-voltage distribution panels
  • Power distribution within machinery control cabinets
  • Organised replacement of multiple wires sharing one feeder terminal

Installation sequence

  1. Isolate the circuit and verify that it is de-energised.
  2. Secure the terminal assembly to the matching rail or mounting surface. Keep accessible metal parts separated from other potentials.
  3. Prepare conductors for full engagement in the clamp, without damaged strands or exposed copper outside the entry.
  4. Tighten each entry to the torque listed for that entry size.
  5. Check conductor retention, circuit identification and continuity. Close any fitted cover before energising the completed assembly.
Practical answers

Frequently asked questions

What does UKK500A connect?

UKK500A single-pole power distribution block: 500 A, laminated busbar input and 11 branch outputs under a transparent cover.

Are the outputs separate poles?

No. All entries in a single UKK block share one electrical potential. Use separate blocks for separate phases or neutral.

Is Ui the operating-voltage rating?

No. Rated insulation voltage describes insulation coordination. It is not permission to operate a complete assembly at that voltage.

Does the cover make the block waterproof?

No. Install the block inside an enclosure suited to the operating environment. Keep the cover closed after connection.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include UKK500A Power Distribution Block model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing