PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→
Home/Cable & Busbar Accessories/Cable Trunking/Slotted PVC Wiring Duct

CHSO / cabinet cable routing

Slotted PVC Wiring Duct

Grey rigid PVC duct with slotted sidewalls and a removable cover. Route wires inside electrical cabinets and bring branch wires out through the side openings.

51cross-section sizes
H × Wheight first, then width
2 mnominal length
Grey slotted PVC wiring duct with cover and branch wires routed through the sidewall slots
Grey duct with removable cover. Wires and terminals illustrate the routing arrangement.

Product specification

Construction & dimensions

Material
Rigid PVC
Colour
Grey
Construction
Slotted base with removable cover
Nominal length
2,000 mm / 2 m
Size convention
Height H × width W, in mm
Wall thickness
1.1–1.9 mm; see each size

Cross-section selection

Find your height and width

Download dimensions · CSV ↓

51 matching sizes

Scroll the table horizontally on small screens. Pack quantities are metres per pack, not pieces. Listed weights are per pack; confirm the final packed weight for shipment.

Slotted PVC wiring duct · H × W, in millimetres. Packing quantities are linear metres.
Size H × W (mm)Height H (mm)Width W (mm)Wall thickness (mm)Pack quantity (m/pack)Listed pack weight (kg/pack)Enquiry
20×1520151.110012
20×2020201.210014
25×2525251.2510021
25×3025301.2510022
30×2030201.210020
30×2530251.310023
30×3030301.310025
30×3530351.310030
30×4030401.3510035
35×3035301.310028
35×3535351.3510032
40×2540251.3510027
40×3040301.3510028
40×3540351.410035
40×4040401.410040
40×6040601.510050
45×4545451.510041
50×2550251.510032
50×3050301.510034
50×3550351.510040
50×4050401.510040
50×4550451.510041
50×5050501.5510048
50×5550551.5510051
50×6050601.68043
50×8050801.656041
50×100501001.656040
60×2560251.610040
60×3060301.610041
60×3560351.610044
60×4060401.6510050
60×4560451.658042
60×5060501.68042
60×6060601.658043
60×8060801.76046
60×100601001.74841
65×6565651.76041
80×3080301.756031
80×3580351.86033
80×4080401.86034
80×5080501.856042
80×5580551.86042
80×6080601.856043
80×8080801.93631
80×100801001.93635
100×30100301.86038
100×40100401.86041
100×50100501.856044
100×60100601.856050
100×80100801.93635
100×1001001001.93638

Geometry reference

Cross-section & sidewall slots

Height and width describe the duct cross-section. The sidewall slot opening and finger width are separate dimensions.

W — widthHtOrdering dimensions: H × W
Cross-section schematic · H = height, W = width, t = wall thickness. Not to scale.
SFS = slot opening · F = finger width
Wide-finger sidewall schematic · slot opening S and finger width F. Not to scale.
Sidewall geometry by duct height
Duct height H (mm)Slot opening S (mm)Finger width F (mm)
20–3556
40–6068
80810
100911

For the 65 mm height, request the size-specific slot geometry with your enquiry.

Base mounting holes

The base-hole layouts below are grouped by duct width W. Check the selected width before locating the panel fixing points.

50 mm centres15 mm5 mmBase width: 20–60 mm
W = 20–60 mm · 5 × 15 mm longitudinal slots at 50 mm centres. Schematic, not to scale.
25 mm25 mm50 mmMain slots: 5 × 15 mm · Small opening: 6 × 8 mm
W = 80–100 mm · 5 × 15 mm slots; 25 mm transverse spacing and 50 mm longitudinal centres. An additional 6 × 8 mm opening is shown. Schematic, not to scale.

For widths of 15 mm and 65 mm, confirm the mounting-hole layout for the selected size.

Assembly sequence

Fix the base, route the wires, fit the cover

01

Position the base

Check the cabinet layout and fixing positions. Leave access for removing the cover.

02

Secure the duct

Fix the base through the mounting holes using fasteners suited to the panel.

03

Route the wiring

Place the wires inside the channel and bring branch wires through the side openings.

04

Close the cover

Check that no wire is trapped at the edges, then fit the cover along the base.

Selection questions

Before you order

Does 40 × 60 mean width × height?

No. Dimensions on this page use height × width (H × W). The 40 × 60 size is 40 mm high and 60 mm wide.

Does a pack quantity of 100 mean 100 lengths?

No. The packing column is measured in linear metres per pack. The nominal duct length is 2 m; confirm the supplied length and number of pieces with the order.

How many wires fit inside a duct?

Capacity depends on each wire’s outside diameter and the space needed for routing and access. Share the cable sizes and quantity when requesting a recommendation.

Do all sizes use the same slots and mounting holes?

No. Sidewall openings vary with duct height, while base-hole patterns vary with duct width. Check the geometry sections for the selected dimensions.

Product enquiry

Send the size and quantity

Specify each size as H × W. Add the required length in metres, destination and packing requirements.

Contact CHSO →

Useful order details

  • Height × width and quantity for each size
  • Required supplied length and cover requirements
  • Mounting-hole or branch-wire constraints
  • Destination, packaging and target delivery schedule

This list stays in your browser until cleared. Copy it into your enquiry; adding a size does not send a message.