SM-A Busbar Standoff Insulators
Waisted, hex-centre busbar standoffs in ten height profiles from 20 to 76 mm.
10 profiles / references Explore series →Round-body insulator profiles identified by diameter and height, with threaded inserts at both ends.
| Parameter | Selection detail |
|---|---|
| Product format | Threaded standoffs |
| Insulating body | BMC (bulk moulding compound) / SMC (sheet moulding compound) options; specify required grade |
| Insert specification | Brass or zinc-coated steel options; confirm model configuration |
| Dimensions | Millimetres; model-specific drawings below |
| Colour and configuration | Specify in the RFQ; confirm availability for the selected model |
Filter a reference, then open its dimensional drawing below.
8 profiles / references
| Model / profile | Height (mm) | Body diameter (mm) | Screw size (mm) | Screw depth (mm) | Tensile strength (lbf) | Withstand (kV) | Torque strength (ft·lbf) |
|---|---|---|---|---|---|---|---|
| Ø30 × 30 | 30 | 30 | 6 | 10 | 500 | 5 | 8 |
| Ø30 × 40 | 40 | 30 | 6 | 12 | 500 | 6 | 10 |
| Ø30 × 60* | 60 | See note | 10 | 15 | 650 | 15 | 40 |
| Ø40 × 40 | 40 | 40 | 8 | 13 | 650 | 10 | 12 |
| Ø40 × 60 | 60 | 40 | 10 | 15 | 650 | 15 | 40 |
| Ø50 × 40* | See note | 50 | 10 | 13 | 1000 | 10 | 50 |
| Ø50 × 50* | See note | 50 | 10 | 13 | 1000 | 10 | 50 |
| Ø50 × 60* | 60 | See note | 10 | 13 | 1200 | 12 | 50 |
No matching reference. Clear the search to see all profiles.
* Dimensional confirmation: the Ø30 × 60 heading has a Ø40 drawing; Ø50 × 40 and Ø50 × 50 show heights of 50 and 40 respectively; Ø50 × 60 has a Ø40 drawing. These conflicting dimensions are not treated as confirmed ordering sizes.
Open a reference to inspect the original drawing. Dimensions are in millimetres.
Use diameter × height rather than an inferred SE order code. For starred entries, send the required dimensions and drawing for confirmation before ordering.
Round-body insulator profiles identified by diameter and height, with threaded inserts at both ends.
Use diameter × height rather than an inferred SE order code. For starred entries, send the required dimensions and drawing for confirmation before ordering.
No. Withstand voltage is a dielectric-test property, not continuous working voltage. Torque strength is not a recommended tightening torque. Confirm the test conditions and fastening specification for the intended assembly.
BMC and SMC material options are listed for this range. State the required material grade, colour and insert specification in the RFQ; confirm the selected configuration and its supporting documentation before ordering.
Send SE model and drawing reference, bar dimensions, fixing details and quantities.
Waisted, hex-centre busbar standoffs in ten height profiles from 20 to 76 mm.
10 profiles / references Explore series →An alternative SM standoff construction with ten profiles and model-specific body dimensions.
10 profiles / references Explore series →Twenty body profiles with alternative screw sizes, covering 16 to 75 mm heights.
20 profiles / references Explore series →