SM-A Busbar Standoff Insulators
Waisted, hex-centre busbar standoffs in ten height profiles from 20 to 76 mm.
10 profiles / references Explore series →Straight hexagonal insulating bodies with 25 to 120 mm heights and two principal body widths.
| Parameter | Selection detail |
|---|---|
| Product format | Threaded standoffs |
| Insulating body | BMC (bulk moulding compound) / SMC (sheet moulding compound) options; specify required grade |
| Insert specification | Brass or zinc-coated steel options; confirm model configuration |
| Dimensions | Millimetres; model-specific drawings below |
| Colour and configuration | Specify in the RFQ; confirm availability for the selected model |
Filter a reference, then open its dimensional drawing below.
9 profiles / references
| Model / profile | Height (mm) | Hex / width (mm) | Screw size (mm) | Screw depth (mm) | Tensile strength (lbf) | Withstand (kV) | Torque strength (ft·lbf) |
|---|---|---|---|---|---|---|---|
| EN-25 | 25 | 26 | 6 | 9 | 500 | 6 | 10 |
| EN-30 | 30 | 26 | 6 | 9 | 550 | 7 | 10 |
| EN-32 | 32 | 26 | 6 | 9 | 600 | 8 | 10 |
| EN-40 | 40 | 26 | 6 | 9 | 650 | 10 | 10 |
| EN-60 | 60 | 45 | 10 | 14 | 1200 | 20 | 25 |
| EN-80 | 80 | 45 | 10 | 18 | 1500 | 25 | 40 |
| EN-100 | 100 | 45 | 10 | 18 | 2000 | 25 | 40 |
| EN-110 | 110 | 45 | 10 | 18 | 2200 | 25 | 40 |
| EN-120 | 120 | 45 | 10 | 18 | 2200 | 25 | 40 |
No matching reference. Clear the search to see all profiles.
Open a reference to inspect the original drawing. Dimensions are in millimetres.
Specify the EN height code, hexagonal body width and screw size. Confirm clearance around the complete busbar and fastener assembly.
Straight hexagonal insulating bodies with 25 to 120 mm heights and two principal body widths.
Specify the EN height code, hexagonal body width and screw size. Confirm clearance around the complete busbar and fastener assembly.
No. Withstand voltage is a dielectric-test property, not continuous working voltage. Torque strength is not a recommended tightening torque. Confirm the test conditions and fastening specification for the intended assembly.
BMC and SMC material options are listed for this range. State the required material grade, colour and insert specification in the RFQ; confirm the selected configuration and its supporting documentation before ordering.
Send EN model and drawing reference, bar dimensions, fixing details and quantities.
Waisted, hex-centre busbar standoffs in ten height profiles from 20 to 76 mm.
10 profiles / references Explore series →An alternative SM standoff construction with ten profiles and model-specific body dimensions.
10 profiles / references Explore series →Twenty body profiles with alternative screw sizes, covering 16 to 75 mm heights.
20 profiles / references Explore series →