EL Slotted Busbar Supports
Twelve slotted support profiles with model-specific lengths, fixing centres and groove options.
12 profiles / references Explore series →Stepped and offset support bodies with individual fixing points at different levels.
| Parameter | Selection detail |
|---|---|
| Product format | Busbar supports |
| Insulating body | BMC (bulk moulding compound) / SMC (sheet moulding compound) options; specify required grade |
| Insert specification | Brass or zinc-coated steel options; confirm model configuration |
| Dimensions | Millimetres; model-specific drawings below |
| Colour and configuration | Specify in the RFQ; confirm availability for the selected model |
Filter a reference, then open its dimensional drawing below.
10 profiles / references
| Model / drawing reference | Overall length (mm) | Height / section (mm) | Fixing / geometry notes |
|---|---|---|---|
| CT2-15 | 50 | 40 | M6; 20 mm section |
| CT2-20 | See drawing | 60 | 4 × M6; 2 × M8; 21 mm upper pitch |
| CT2-25 | 80 | 60 | M8; 30 mm section |
| CT5-25 | 135 | See drawing | M6; Ø6.5 fixing hole |
| CT4-30 | 132 | 130 | 4 × M8; M10; Ø11 hole |
| CT4-40 | 164 | 148 | 4 × M8; M10; Ø11 hole |
| CT4-50 | 212 | 200 | 4 × M10; Ø11 hole |
| CJ4-30 | 230 | 100 | 4 × M8; M10; 30 mm section |
| CJ4-40 | 230 | 100 | 4 × M10; M10; 30 mm section |
| CJ-50 | 275 | 100 | 4 × M10; M10; 35 mm section |
No matching reference. Clear the search to see all profiles.
Open a reference to inspect the original drawing. Dimensions are in millimetres.
Match the stepped layout, number of fixing points, busbar width and fixing threads. CT and CJ labels are retained as distinct drawing references.
Stepped and offset support bodies with individual fixing points at different levels.
Match the stepped layout, number of fixing points, busbar width and fixing threads. CT and CJ labels are retained as distinct drawing references.
No. The drawings describe geometry and fixing arrangements. Electrical and mechanical verification depends on the complete busbar system, bar spacing and support arrangement.
BMC and SMC material options are listed for this range. State the required material grade, colour and insert specification in the RFQ; confirm the selected configuration and its supporting documentation before ordering.
Send CT / CJ model and drawing reference, bar dimensions, fixing details and quantities.
Twelve slotted support profiles with model-specific lengths, fixing centres and groove options.
12 profiles / references Explore series →D3, D4, S3 and S4 support layouts with 6, 8, 10 or 12 mm groove options, plus 7D profiles.
18 profiles / references Explore series →Framed busbar support assemblies and two dimensioned support-rail profiles.
3 profiles / references Explore series →