Cable Gland Thread Standards: Metric, PG and NPT Explained
· admin
A cable gland is only a small part of an electrical enclosure, but the wrong thread can stop an installation. Metric, PG and NPT glands are common in different markets and equipment families. They may look similar in a catalogue, yet they are not interchangeable.
For importers and equipment builders, the safest approach is to confirm the thread standard and the cable diameter before asking for a price.
Metric threads
Metric cable glands use a metric thread such as M16, M20, M25 or M32. The number refers to the nominal thread diameter in millimetres. Metric glands are widely used in modern enclosures and control equipment. The thread size alone is not enough. The cable diameter and the available space inside the enclosure also need to match.
PG threads
PG is an older German thread system that is still found on existing equipment and replacement projects. A PG13.5 gland should not be treated as a direct substitute for an M20 gland simply because the outside dimensions appear close. The pitch and thread form are different.
NPT threads
NPT is a tapered thread system used widely in North American equipment and in projects that follow US specifications. NPT sizes are written in inch-based nominal sizes, such as 1/2 inch or 3/4 inch. The nominal size does not equal the measured outside diameter. Confirm the standard before ordering.
Can different thread standards be mixed?
Usually, no. A gland and an enclosure entry need matching thread specifications. An adapter may solve a particular installation problem, but it adds another component and may affect sealing space, grounding or the final IP performance. It is better to confirm the enclosure thread at the start.
Match the gland to the cable
The cable outside diameter is just as important as the thread. A gland that is too small may damage the cable or fail to seal. A gland that is too large may not grip the cable correctly. Provide the actual outside diameter range, especially when the cable has an outer jacket, braid or armour.
Material and protection
Nylon glands are often selected for general indoor or light industrial use. Nickel-plated brass and stainless steel may be preferred for mechanical strength, temperature, corrosion or grounding requirements. The material should follow the enclosure, cable and environment rather than the unit price alone.
IP protection is a system result. The gland, sealing ring, enclosure entry, cable surface and installation torque all matter. Confirm the applicable IP requirement for the complete assembly.
Information to include in an inquiry
- Thread standard and size
- Cable outside diameter range
- Material and colour
- Required IP rating
- Armoured or unarmoured cable
- Locknut, washer and accessory requirements
- Quantity and packaging
- Destination market
Before approving a replacement
Measure the enclosure entry and identify the thread standard from the drawing or equipment documentation. If the standard is uncertain, send a clear photo with a scale and provide the cable diameter. A sample check is worthwhile when the gland is part of a sealed or outdoor assembly.
For a cable gland quotation, send the thread type, cable diameter, material, IP requirement and quantity. CHSO can help confirm the information needed before quotation.
Leave a Reply