PRIVATE DESIGN PREVIEW Product data and supply terms are being verified. RFQ lists stay in this browser.
Wenzhou Changsong Electric Co., Ltd.
Catalogs & technical filesContact & inquiryEN
CHSOINDUSTRIAL ELECTRICALRequest a quote 0→

CHSO / INDUSTRIAL WIRELESS CONTROLS

C200 industrial
wireless remote control.

A compact 433 MHz transmitter and receiver system for crane and electric-hoist control projects. Compare the standard C200 data, then choose the required receiver supply and kit configuration.

C200 orange handheld wireless transmitter and matching receiver
C200 transmitter and receiver · illustrated configuration
433 MHzRadio frequency
Up to 100 mSpecified control distance
2 × AAStandard transmitter supply
IP66Declared receiver protection

MODEL-SPECIFIC TECHNICAL DATA

Transmitter and receiver,
specified separately.

Standard C200 transmitter and receiver data are listed separately below. Choose receiver supply and kit contents in Order configurations.

C200 transmitter specification
ParameterSpecification
ModelC200
Radio frequency433 MHz
Transmitting power≤10 dBm
Transmitter power2 × AA alkaline batteries
HousingGlass-fibre-reinforced nylon
Security code32-bit
Operating temperature−35 °C to +80 °C
Control distanceUp to 100 m; actual range depends on site conditions
Dimensions (L × W × D)148 × 76 × 24 mm
Approximate weight320 g
C200 receiver specification
ParameterSpecification
ModelC200
Radio frequency433 MHz
HousingGlass-fibre-reinforced nylon
Declared enclosure protectionIP66
Security code32-bit
Receiver sensitivity−110 dBm
Dimensions (W × H × D)90 × 90 × 50 mm
Approximate weight630 g
Receiver supply options36 / 220 / 380 V AC

Dimensions and weights are approximate. IP66 describes the receiver enclosure; it does not extend to the complete installed control system.

Download C200 specification table (CSV) ↓

ORDER CONFIGURATIONS

Choose the kit and receiver supply.

For a new installation, start with one transmitter and one receiver, then select the receiver supply. For a spare handset, choose transmitter only and include the existing receiver label. Two-transmitter and rechargeable kits are separate configurations.

C200 — available order configurations
Ref.ModelSupply configurationReceiver voltageOrder note
1C2001 transmitter + 1 receiver36 V ACStandard kit
2C2001 transmitter + 1 receiver220 V ACStandard kit
3C2001 transmitter + 1 receiver380 V ACStandard kit
13C2002 transmitters + 1 receiverSpecify when enquiringDescribe how the two transmitters will be used
17C2001 transmitter + 1 receiverSpecify when enquiringRechargeable transmitter version
21C200 / C400Replacement housingNot applicableInclude a housing photo and the part required
22C200Transmitter onlyReceiver supply not includedInclude the receiver label and channel code
Compare C200 with the C series →

FUNCTION & INTEGRATION

From the handset to the control circuit.

01 / HOUSING

Reinforced nylon construction.

The C200 uses a glass-fibre-reinforced nylon housing. The illustrated handset includes a protective outer sleeve and silicone function buttons.

02 / RADIO

Pairing and channel configuration.

The C200 specification lists wireless pairing, selectable RF channels and a 32-bit security code. Use the pairing instructions for the receiver version when adding or replacing a transmitter.

03 / CONFIGURATION

Set up the required actions.

Button actions, interlocks and RF channels are configurable through the PC interface described for C200. Include the desired actions in your inquiry; software and programming-cable requirements belong with the selected receiver version.

Replacing a transmitter or receiver?

Include the receiver-label photograph, serial number and channel code. These identify the version needed for pairing and the correct wiring information; the C200 model name alone does not identify the control outputs.

KIT CONTENTS

A clear list
of what is supplied.

The illustrated set shows one transmitter, one receiver, dust cover, protective sleeve, QC certificate, user manual, accessories and function labels.

The packing list follows the kit you choose. For a rechargeable version, include the battery and charging accessories in the requested package.

  • One-transmitter kit, two-transmitter kit or replacement handset
  • Required receiver cable length and installation accessories
  • Connection diagram for the selected receiver
C200 remote control kit with transmitter, receiver, manual, protective parts and function labels
Illustrated kit contents · accessories vary by configuration

CONFIGURATION BRIEF

Four details for
a useful C200 quotation.

  1. Control functions

    List motions, start/stop functions, operating stages and interlocks.

  2. Receiver interface

    State the supply voltage, AC/DC type and required control outputs.

  3. Installation & market

    Provide the equipment drawing, installation conditions and destination.

  4. Documents & packing

    Identify required technical files, accessories, quantities and packaging.

SELECTION QUESTIONS

C200 questions, answered.

What is the C200 wireless remote control used for?

C200 is a handheld radio control for crane and electric-hoist control projects. Start with the required motions and speed stages, then match the receiver supply and outputs to the equipment control circuit.

Does the C200 use batteries or a rechargeable pack?

The standard C200 transmitter uses two AA alkaline batteries. A rechargeable transmitter is a separate kit version, with its own battery and charging accessories.

Is the 100 m control distance guaranteed at every site?

Up to 100 m is the stated C200 control distance. Metal structures, obstacles, antenna placement and radio conditions affect the usable range at an installation.

What does the IP66 specification cover?

IP66 is the stated enclosure protection for the C200 receiver. It does not describe the transmitter, the complete installation or immersion protection. Project documentation should name the receiver version covered.

Can a replacement transmitter be paired with an existing receiver?

C200 supports wireless pairing. For a replacement handset, include the existing receiver label, serial number and channel code so the pairing procedure and output configuration match that receiver.

What should a distributor include in a quotation request?

Start with C200 quantity, kit choice and receiver supply. Add the required control functions and destination. Include a receiver-label photo for replacements, or the control drawing for a new installation.

TECHNICAL ENQUIRY

Add C200 to your inquiry.

Share the required motions, receiver supply and equipment interface with your model and quantity.

Contact CHSO →

Prepare your notes here, then include them with your enquiry.