Wenzhou Changsong Electric Co., Ltd.
Catálogos e arquivos técnicosContato e perguntasWhatsApp
CHSOELETRICIDADE INDUSTRIALSolicite um orçamento 0→
Ferrule / TE SERIES

TE Twin Wire Ferrules

TE twin wire ferrules crimp two flexible copper conductors into one ferrule. The size is stated per conductor: 2 × 1.5 mm² means two 1.5 mm² wires, and the receiving terminal must accept the resulting ferrule profile.

2 × 0.5 to 2 × 16 mm²13 variantsPP / nylon collar options
View model dimensions ↓
TE Twin Wire Ferrules
PRODUCT SPECIFICATION

Built around your connection.

Conductor range
2 × 0.5 to 2 × 16 mm²
Conductor
Stranded copper
Contact material
Copper
Insulation
PP / nylon collar options
Connection
Ferrule
Variants
13
Maximum collar temperature
105 °C
Insulation voltage
300 V

Selection essentials

Use two conductors of the stated cross-section. Do not size a twin ferrule solely by the sum of the two wire areas.

Typical applications

Control-panel terminal blocks, power supplies and other clamps designed to accept ferruled flexible conductors.

COMPLETE MODEL TABLE

TE dimensions & wire sizes.

TE terminal dimensional drawing
TE dimensional reference

Read the dimensions before selecting.

Use two conductors of the stated cross-section. Do not size a twin ferrule solely by the sum of the two wire areas.

All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.

13 model variants

TE Twin Wire Ferrules — model dimensions and conductor selection
ModeloConductors mm²Tube F mmOverall L mmCollar W mmCollar B mmTube D mmBore C mmGerman colorFrench color
TE05082 × 0.5814.556.51.81.5WhiteWhite
TE75082 × 0.75814.75.56.72.11.8BlueGray
TE75102 × 0.751016.75.56.72.11.8BlueGray
TE10082 × 1815.15.57.12.32RedRed
TE10102 × 11017.15.57.12.32RedRed
TE15082 × 1.5815.56.47.22.62.3BlackYellow
TE15122 × 1.51219.56.47.52.62.3BlackYellow
TE25102 × 2.51018.588.53.32.9GrayBlue
TE25132 × 2.51321.588.53.32.9GrayBlue
TE40122 × 41223.18.811.14.23.8OrangeGray
TE60142 × 61426.19.512.15.34.9GreenYellow
TE10-142 × 101426.612.6126.96.5BrownRed
TE16-142 × 161431.31917.38.78.3WhiteBlue

Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.

AWG and kcmil values are size references, not exact conversions of every metric cross-section.

W is the maximum collar width; B is the collar length. D and C are the metal tube outer diameter and bore. The drawing is a shape reference; model dimensions are listed in the table.

ASSEMBLY GUIDE

A suitable terminal needs a suitable crimp.

01 / Match

Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.

02 / Prepare

Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.

03 / Crimp

Use a die intended for wire ferrules and the selected wire size. Complete the tool’s crimp cycle.

04 / Inspect

Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.

TE questions answered.

What is the TE series used for?

TE twin wire ferrules crimp two flexible copper conductors into one ferrule. The size is stated per conductor: 2 × 1.5 mm² means two 1.5 mm² wires, and the receiving terminal must accept the resulting ferrule profile.

How do I choose a TE model?

Use two conductors of the stated cross-section. Do not size a twin ferrule solely by the sum of the two wire areas.

Can I select the terminal by insulation color alone?

No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.

How should the terminal be crimped?

Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.

Can two wires be put in a single-wire ferrule?

Use a TE twin ferrule sized for both conductors and a receiving terminal that accepts the finished crimp. A single-wire E or EN ferrule is not selected simply by forcing two wires into its tube.

COMPARE CONNECTION OPTIONS

Related terminal families.

BUILD YOUR TERMINAL ORDER

Specify your TE models.

Send the complete model codes, quantities, conductor sizes and destination country.

Enquire with CHSO →
WhatsApp