BV Insulated Butt Splices
BV insulated butt splices join two copper conductors end to end. Each wire enters a separate end of the barrel and is crimped independently; the PVC sleeve covers the completed splice.
Built around your connection.
- Conductor range
- 0.5–50 mm²
- Conductor
- Copper wire
- Contact material
- Brass
- Insulation
- PVC
- Connection
- Splice
- Variants
- 10
Selection essentials
Use the same conductor range at both ends. This straight butt splice is not a reducer or a two-into-one junction.
Typical applications
Inline repairs, harness assembly and conductor extensions inside suitably protected electrical enclosures.
BV dimensions & wire sizes.
Read the dimensions before selecting.
Use the same conductor range at both ends. This straight butt splice is not a reducer or a two-into-one junction.
All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.
10 model variants
| Modelo | Wire mm² | AWG | Metal length l mm | Bore d mm | Overall L mm | Imax A | Color |
|---|---|---|---|---|---|---|---|
| BV1.25 | 0.5-1.5 | 22-16 | 15 | 1.7 | 26 | 19 | Red |
| BV2 | 1.5-2.5 | 16-14 | 15 | 2.3 | 26 | 27 | Blue |
| BV5.5 | 4-6 | 12-10 | 15 | 3.4 | 26 | 48 | Yellow |
| BV8 | 6-10 | 8 | 21 | 4.5 | 32 | 62 | Red |
| BV14 | 10-16 | 6 | 26 | 5.8 | 42 | 88 | Blue |
| BV22 | 16-25 | 4 | 29 | 7.7 | 50 | 115 | Yellow |
| BV38 | 35-50 | 2 | 32 | 9.4 | 55 | 160 | Red |
| PVT1.25 | .5–1.5 | 22–16 | 8 | 1.7 | 16 | 19 | Red |
| PVT2 | 1.5–2.5 | 16–14 | 8 | 2.3 | 16 | 27 | Blue |
| PVT5.5 | 4–6 | 12–10 | 8.5 | 3.4 | 20.5 | 48 | Yellow |
No models match. Clear the search or select another conductor size.
Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.
AWG and kcmil values are size references, not exact conversions of every metric cross-section.
Imax is the terminal size reference limit. The permissible circuit current also depends on wire size, ambient temperature, crimp quality and the mating terminal; use the lowest applicable limit.
PVT is the short-body splice option in this table. Match the shorter metal barrel and overall length to the available installation space.
A suitable terminal needs a suitable crimp.
Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.
Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.
Use a die intended for this terminal construction and the selected wire size. Complete the tool’s crimp cycle.
Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.
BV questions answered.
What is the BV series used for?
BV insulated butt splices join two copper conductors end to end. Each wire enters a separate end of the barrel and is crimped independently; the PVC sleeve covers the completed splice.
How do I choose a BV model?
Use the same conductor range at both ends. This straight butt splice is not a reducer or a two-into-one junction.
What is the difference between BV and PVT?
BV is the long-body insulated butt splice. PVT is the shorter version for the 0.5–6 mm² size families, with model-specific barrel and overall lengths shown in the table.
Can I select the terminal by insulation color alone?
No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.
How should the terminal be crimped?
Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.
What should I include in an enquiry?
List the complete BV model code, quantity and conductor size. Add the stud, tab, pin or barrel dimensions relevant to your installation and your destination country.
Related terminal families.
Specify your BV models.
Send the complete model codes, quantities, conductor sizes and destination country.