TE Twin Wire Ferrules
TE twin wire ferrules crimp two flexible copper conductors into one ferrule. The size is stated per conductor: 2 × 1.5 mm² means two 1.5 mm² wires, and the receiving terminal must accept the resulting ferrule profile.
Built around your connection.
- Conductor range
- 2 × 0.5 to 2 × 16 mm²
- Director de orquesta
- Stranded copper
- Contact material
- Cobre
- Insulation
- PP / nylon collar options
- Conexión
- Ferula
- Variants
- 13
- Maximum collar temperature
- 105 °C
- Insulation voltage
- 300 V
Selection essentials
Use two conductors of the stated cross-section. Do not size a twin ferrule solely by the sum of the two wire areas.
Typical applications
Control-panel terminal blocks, power supplies and other clamps designed to accept ferruled flexible conductors.
TE dimensions & wire sizes.
Read the dimensions before selecting.
Use two conductors of the stated cross-section. Do not size a twin ferrule solely by the sum of the two wire areas.
All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.
13 model variants
| Modelo | Conductors mm² | Tube F mm | Overall L mm | Collar W mm | Collar B mm | Tube D mm | Bore C mm | German color | French color |
|---|---|---|---|---|---|---|---|---|---|
| TE0508 | 2 × 0.5 | 8 | 14.5 | 5 | 6.5 | 1.8 | 1.5 | White | White |
| TE7508 | 2 × 0.75 | 8 | 14.7 | 5.5 | 6.7 | 2.1 | 1.8 | Blue | Gray |
| TE7510 | 2 × 0.75 | 10 | 16.7 | 5.5 | 6.7 | 2.1 | 1.8 | Blue | Gray |
| TE1008 | 2 × 1 | 8 | 15.1 | 5.5 | 7.1 | 2.3 | 2 | Red | Red |
| TE1010 | 2 × 1 | 10 | 17.1 | 5.5 | 7.1 | 2.3 | 2 | Red | Red |
| TE1508 | 2 × 1.5 | 8 | 15.5 | 6.4 | 7.2 | 2.6 | 2.3 | Black | Yellow |
| TE1512 | 2 × 1.5 | 12 | 19.5 | 6.4 | 7.5 | 2.6 | 2.3 | Black | Yellow |
| TE2510 | 2 × 2.5 | 10 | 18.5 | 8 | 8.5 | 3.3 | 2.9 | Gray | Blue |
| TE2513 | 2 × 2.5 | 13 | 21.5 | 8 | 8.5 | 3.3 | 2.9 | Gray | Blue |
| TE4012 | 2 × 4 | 12 | 23.1 | 8.8 | 11.1 | 4.2 | 3.8 | Orange | Gray |
| TE6014 | 2 × 6 | 14 | 26.1 | 9.5 | 12.1 | 5.3 | 4.9 | Green | Yellow |
| TE10-14 | 2 × 10 | 14 | 26.6 | 12.6 | 12 | 6.9 | 6.5 | Brown | Red |
| TE16-14 | 2 × 16 | 14 | 31.3 | 19 | 17.3 | 8.7 | 8.3 | White | Blue |
No models match. Clear the search or select another conductor size.
Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.
AWG and kcmil values are size references, not exact conversions of every metric cross-section.
W is the maximum collar width; B is the collar length. D and C are the metal tube outer diameter and bore. The drawing is a shape reference; model dimensions are listed in the table.
A suitable terminal needs a suitable crimp.
Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.
Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.
Use a die intended for wire ferrules and the selected wire size. Complete the tool’s crimp cycle.
Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.
TE questions answered.
What is the TE series used for?
TE twin wire ferrules crimp two flexible copper conductors into one ferrule. The size is stated per conductor: 2 × 1.5 mm² means two 1.5 mm² wires, and the receiving terminal must accept the resulting ferrule profile.
How do I choose a TE model?
Use two conductors of the stated cross-section. Do not size a twin ferrule solely by the sum of the two wire areas.
Can I select the terminal by insulation color alone?
No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.
How should the terminal be crimped?
Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.
Can two wires be put in a single-wire ferrule?
Use a TE twin ferrule sized for both conductors and a receiving terminal that accepts the finished crimp. A single-wire E or EN ferrule is not selected simply by forcing two wires into its tube.
Related terminal families.
Specify your TE models.
Envíe los códigos completos del modelo, las cantidades, los tamaños de los conductores y el país de destino.