Wenzhou Changsong Electric Co., Ltd.
Catálogos y ficheros técnicosContacto e indagaciónWhatsApp
CHSOELECTRÓNICA INDUSTRIALSolicite un presupuesto 0→
Ferrule / E SERIES

E Conexiones de alambre aisladas

E insulated wire ferrules consolidate the strands of a single flexible copper conductor before insertion into a terminal block. Choose the conductor cross-section and metal tube length to suit the terminal entry.

0.25–150 mm²49 variantsPP / nylon collar options
View model dimensions ↓
E Insulated Wire Ferrules
PRODUCT SPECIFICATION

Built around your connection.

Conductor range
0.25–150 mm²
Director de orquesta
Stranded copper
Contact material
Cobre
Insulation
PP / nylon collar options
Conexión
Ferula
Variants
49
Maximum collar temperature
105 °C
Insulation voltage
300 V

Selection essentials

Choose F, the metal tube length, for the terminal insertion depth. The collar remains outside the terminal contact area.

Typical applications

Control-panel terminal blocks, power supplies and other clamps designed to accept ferruled flexible conductors.

COMPLETE MODEL TABLE

E dimensions & wire sizes.

E terminal dimensional drawing
E dimensional reference

Read the dimensions before selecting.

Choose F, the metal tube length, for the terminal insertion depth. The collar remains outside the terminal contact area.

All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.

49 model variants

E Insulated Wire Ferrules — model dimensions and conductor selection
ModeloWire mm²AWG / kcmilTube F mmOverall L mmCollar W mmTube D mmBore C mmGerman colorFrench color
E02060.2526610.52.510.7Light blueLight blue
E02080.2526812.52.510.7Light blueLight blue
E03060.3424610.52.51.10.8TurquoiseTurquoise
E03080.3424812.52.51.10.8TurquoiseTurquoise
E05060.5226122.61.31OrangeWhite
E05080.5228142.61.31OrangeWhite
E05100.52210162.61.31OrangeWhite
E05120.52212182.61.31OrangeWhite
E75060.7520612.42.81.61.3WhiteBlue
E75080.7520814.62.81.61.3WhiteBlue
E75100.75201016.42.81.61.3WhiteBlue
E75120.75201218.42.81.61.3WhiteBlue
E1006118612.431.81.5YellowRed
E1008118814.631.81.5YellowRed
E10101181016.431.81.5YellowRed
E10121181218.431.81.5YellowRed
E15081.516814.63.521.8RedBlack
E15101.5161016.43.521.8RedBlack
E15121.5161218.43.521.8RedBlack
E15181.5161824.43.521.8RedBlack
E25082.514815.242.62.3BlueGray
E25102.5141017.242.62.3BlueGray
E25122.5141219.242.62.3BlueGray
E25182.5141825.242.62.3BlueGray
E4009412916.54.53.22.8GrayOrange
E40124121219.54.53.22.8GrayOrange
E40184121825.54.53.22.8GrayOrange
E601061010186.33.93.5BlackGreen
E601261012206.33.93.5BlackGreen
E601861018266.33.93.5BlackGreen
E10-121071221.57.64.94.5WhiteBrown
E10-181071827.57.64.94.5WhiteBrown
E16-121651222.28.86.25.8GreenWhite
E16-181651828.28.86.25.8GreenWhite
E25-16254162911.27.97.5BrownBlack
E25-22254223511.27.97.5BrownBlack
E35-16352163012.78.78.3GrayGray
E35-25352253912.78.78.3GrayGray
E50-20501203615.310.910.3OliveOlive
E50-25501254115.310.910.3OliveOlive
E70-20702/020371614.313.5YellowYellow
E70-25702/025421614.313.5YellowYellow
E70-27702/027441614.313.5YellowYellow
E95-25953/0254418.515.314.5RedRed
E120-271204/02747.620.317.516.5BlueBlue
E120-321204/03252.620.317.516.5BlueBlue
E150-25150250–300 kcmil2550.623.420.619.6YellowYellow
E150-27150250–300 kcmil2752.623.420.619.6YellowYellow
E150-32150250–300 kcmil3257.623.420.619.6YellowYellow

Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.

AWG and kcmil values are size references, not exact conversions of every metric cross-section.

ASSEMBLY GUIDE

A suitable terminal needs a suitable crimp.

01 / Match

Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.

02 / Prepare

Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.

03 / Crimp

Use a die intended for wire ferrules and the selected wire size. Complete the tool’s crimp cycle.

04 / Inspect

Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.

E questions answered.

What is the E series used for?

E insulated wire ferrules consolidate the strands of a single flexible copper conductor before insertion into a terminal block. Choose the conductor cross-section and metal tube length to suit the terminal entry.

How do I choose a E model?

Choose F, the metal tube length, for the terminal insertion depth. The collar remains outside the terminal contact area.

Can I select the terminal by insulation color alone?

No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.

How should the terminal be crimped?

Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.

Can two wires be put in a single-wire ferrule?

Use a TE twin ferrule sized for both conductors and a receiving terminal that accepts the finished crimp. A single-wire E or EN ferrule is not selected simply by forcing two wires into its tube.

COMPARE CONNECTION OPTIONS

Related terminal families.

CONSTRUYE TU PEDIDO TERMINAL

Specify your E models.

Envíe los códigos completos del modelo, las cantidades, los tamaños de los conductores y el país de destino.

Consultar con CHSO →
WhatsApp