Wenzhou Changsong Electric Co., Ltd.
Catálogos e arquivos técnicosContato e perguntasWhatsApp
CHSOELETRICIDADE INDUSTRIALSolicite um orçamento 0→
Produtos/Fonte de alimentação/S

CHSO / FORÇA INDUSTRIAL

S-200 Enclosed Power Supplies

S-200 single-output enclosed AC/DC power supplies. 5 V / 40 A, 12 V / 16 A, 15 V / 13.3 A, 24 V / 8.3 A, 48 V / 4.2 A. Case: 199 × 110 × 50 mm (L × W × H).

90–132 / 180–264 VAC; select with input switch · 5 output versions

S-200 AC/DC power supply
S-200 / 199 × 110 × 50 mm / L × W × H

Selecionação de modelos

Compare a tensão e a corrente.

Download da tabela de seleção · CSV ↓

5 output versions

A classe da série identifica a família. Use a tabela de tensão/corrente exata para dimensionamento. Os filtros de tensão HLW referem-se à tensão de saída máxima. Role a tabela horizontalmente em telas menores.

Classificação de saída e dimensões do gabinete
ModeloSaída (VDC)Corrente nominal (A)Classe de série (W)Entrada CADimensões do gabinete (mm)Inquérito
S-200-554020090–132 / 180–264 VAC; selecione com o botão de entrada199 × 110 × 50 mmL × W × H
S-200-12121620090–132 / 180–264 VAC; selecione com o botão de entrada199 × 110 × 50 mmL × W × H
S-200-151513.320090–132 / 180–264 VAC; selecione com o botão de entrada199 × 110 × 50 mmL × W × H
S-200-24248.320090–132 / 180–264 VAC; selecione com o botão de entrada199 × 110 × 50 mmL × W × H
S-200-48484.220090–132 / 180–264 VAC; selecione com o botão de entrada199 × 110 × 50 mmL × W × H

ELECTRICAL DATA

S-200 specifications

S-200 — output characteristics
ModeloRipple & noise (mVp-p, max.)EfficiencyLine regulationLoad regulationVoltage adjustment
S-200-55083%±0.5%±0.5%±10%
S-200-125082%±0.3%±0.3%±10%
S-200-157583%±0.3%±0.3%±10%
S-200-2410084%±0.2%±0.2%±10%
S-200-4812086%±0.2%±0.2%±10%

Efficiency is the listed model value; operating conditions affect actual efficiency. Ripple/noise comparison requires the same measurement bandwidth and probe method.

S-200 — input, environment and protection
ParameterSpecification
Entrada CA90–132 / 180–264 VAC; selecione com o botão de entrada
DC input240–370 VDC; switch at 230 VAC
Operating ambient−10 to +60 °C
Humidity20–90% RH; non-condensing installation
Overload protection110–150%; hiccup protection, automatic recovery after fault removal
Overvoltage protectionOutput shutdown; confirm reset sequence for the selected version
MountingChassis mounting; use the matched mounting-hole drawing
Overall dimensions199 × 110 × 50 mm (L × W × H)

MECHANICAL FIT

Dimensions and terminal layout

199 × 110 × 50 mm (L × W × H). Allow additional room for wiring and airflow.

S-200 dimensional drawing in mm
S-200 · dimensions in mm · Open full drawing ↗

Read terminal markings on the selected unit. L/N are AC input; FG/PE is protective earth; +V/−V are DC output. Terminal numbering and the number of parallel terminals vary by model.

Selection notes

INSTALAÇÃO E VERIFICAÇÃO DE CARGA

Verifique o estado de funcionamento completo.

01

Tensão de alimentação e seleção de entrada

02

Carga contínua e demanda inicial

03

Temperatura do gabinete e fluxo de ar

04

Furos de montagem, terminais e aterramento protetor

Desconecte a alimentação antes de conectar ou alterar o selector de entrada. Ligue a terra de proteção ao terminal marcado FG/PE. Mantenha as aberturas de ventilação limpas e use o desenho do modelo selecionado para a montagem. As cargas capacitivas, elétricas e pulsadas exigem verificação de inicialização e carga transitória.

SUPORTE NA SELEÇÃO

Perguntas antes de fazer o pedido

Como dimensionar uma fonte de alimentação para um dispositivo?

Primeiro, ajuste a tensão de saída da fonte de alimentação. Acrescente as correntes contínuas dos equipamentos e inclua a demanda inicial de energia, o tempo de operação e a temperatura do gabinete. Verifique o valor exato da saída; a potência nominal da classe série não é um valor de dimensionamento válido.

É possível que vários terminais de saída forneçam tensões separadas?

Os terminais +V e −V repetidos em uma fonte de alimentação de saída única pertencem à mesma saída. Eles não criam canais independentes. Verifique o desenho dos terminais e a corrente permitida por terminal.

Uma saída ajustável mantém a mesma potência em todos os voltages?

The rated current remains a limit when voltage is reduced. When voltage is increased, current may need to be reduced to remain within the permitted output power. Confirm the operating point and derating curve.

What should I include in an enquiry?

Send the complete model, output voltage, continuous and start-up current, mains voltage, quantity, cabinet temperature and available space. Include the documents, sample or mounting drawing needed for approval.

MODEL-SPECIFIC ENQUIRY

Prepare your power-supply request.

Select models from the table, then enter quantities and application details. Copy the request into your message to CHSO.

Contate a CHSO →

Preparing this list does not send a message.

WhatsApp