CHSO / FORÇA INDUSTRIAL
EDR-150 DIN Rail Power Supplies
EDR-150 single-output DIN rail AC/DC power supplies. 12 V / 12.5 A, 24 V / 6.25 A, 48 V / 3.1 A. Case: 40 × 125 × 113.5 mm (W × H × D).
85–264 VAC · 3 output versions
Selecionação de modelos
Compare a tensão e a corrente.
3 output versions
A classe da série identifica a família. Use a tabela de tensão/corrente exata para dimensionamento. Os filtros de tensão HLW referem-se à tensão de saída máxima. Role a tabela horizontalmente em telas menores.
| Modelo | Saída (VDC) | Corrente nominal (A) | Classe de série (W) | Entrada CA | Dimensões do gabinete (mm) | Inquérito |
|---|---|---|---|---|---|---|
| EDR-150-12 | 12 | 12.5 | 150 | 85–264 VAC | 40 × 125 × 113,5 mmW × H × D | |
| EDR-150-24 | 24 | 6.25 | 150 | 85–264 VAC | 40 × 125 × 113,5 mmW × H × D | |
| EDR-150-48 | 48 | 3.1 | 150 | 85–264 VAC | 40 × 125 × 113,5 mmW × H × D |
Não há versão de saída correspondente. Reduza o filtro atual ou escolha outra tensão.
ELECTRICAL DATA
EDR-150 specifications
| Modelo | Ripple & noise (mVp-p, max.) | Efficiency | Line regulation | Load regulation | Voltage adjustment |
|---|---|---|---|---|---|
| EDR-150-12 | 100 | 88% | ±2% | ±1% | ±10% |
| EDR-150-24 | 120 | 88% | ±2% | ±1% | ±10% |
| EDR-150-48 | 150 | 93% | ±1% | ±1% | ±10% |
Efficiency is the listed model value; operating conditions affect actual efficiency. Ripple/noise comparison requires the same measurement bandwidth and probe method.
| Parameter | Specification |
|---|---|
| Entrada CA | 85–264 VAC |
| DC input | 120–370 VDC |
| Operating ambient | −10 to +60 °C |
| Humidity | 20–90% RH; non-condensing installation |
| Overload protection | 110–150%; hiccup protection, automatic recovery after fault removal |
| Overvoltage protection | Output shutdown; confirm reset sequence for the selected version |
| Mounting | DIN rail mounting; allow ventilation and wiring clearance |
| Overall dimensions | 40 × 125 × 113.5 mm (W × H × D) |
MECHANICAL FIT
Dimensions and terminal layout
40 × 125 × 113.5 mm (W × H × D). Allow additional room for wiring and airflow.
Read terminal markings on the selected unit. L/N are AC input; FG/PE is protective earth; +V/−V are DC output. Terminal numbering and the number of parallel terminals vary by model.
Selection notes
- The series class is a model-family designation. Select using the voltage and current of the exact output version; do not divide the series-class wattage by the voltage to infer current.
- Check load start-up current, cabinet temperature and ventilation before sizing the supply. Request a derating curve where operation approaches the temperature limit.
- Confirm protection reset behaviour and the applicable compliance documents with the order. Ratings shown here do not establish a certification approval.
INSTALAÇÃO E VERIFICAÇÃO DE CARGA
Verifique o estado de funcionamento completo.
Tensão de alimentação e seleção de entrada
Carga contínua e demanda inicial
Temperatura do gabinete e fluxo de ar
Furos de montagem, terminais e aterramento protetor
Desconecte a alimentação antes de conectar ou alterar o selector de entrada. Ligue a terra de proteção ao terminal marcado FG/PE. Mantenha as aberturas de ventilação limpas e use o desenho do modelo selecionado para a montagem. As cargas capacitivas, elétricas e pulsadas exigem verificação de inicialização e carga transitória.
SUPORTE NA SELEÇÃO
Perguntas antes de fazer o pedido
Como dimensionar uma fonte de alimentação para um dispositivo?
Primeiro, ajuste a tensão de saída da fonte de alimentação. Acrescente as correntes contínuas dos equipamentos e inclua a demanda inicial de energia, o tempo de operação e a temperatura do gabinete. Verifique o valor exato da saída; a potência nominal da classe série não é um valor de dimensionamento válido.
É possível que vários terminais de saída forneçam tensões separadas?
Os terminais +V e −V repetidos em uma fonte de alimentação de saída única pertencem à mesma saída. Eles não criam canais independentes. Verifique o desenho dos terminais e a corrente permitida por terminal.
Uma saída ajustável mantém a mesma potência em todos os voltages?
The rated current remains a limit when voltage is reduced. When voltage is increased, current may need to be reduced to remain within the permitted output power. Confirm the operating point and derating curve.
What should I include in an enquiry?
Send the complete model, output voltage, continuous and start-up current, mains voltage, quantity, cabinet temperature and available space. Include the documents, sample or mounting drawing needed for approval.
MODEL-SPECIFIC ENQUIRY
Prepare your power-supply request.
Select models from the table, then enter quantities and application details. Copy the request into your message to CHSO.
Contate a CHSO →Preparing this list does not send a message.