CST Strip & Single Terminal Blocks
CST8 strips and CST1 single terminals cover different conductor sections and fixing formats. Use the dimension-letter drawing for CST8 and the screw-size table for CST1.
Understand the series.
| CST8 housing | PA as specified in the catalogue |
|---|---|
| CST1 material options | PE / PP / PA; specify the required option |
| Размеры | Millimetres; letters follow the catalogue drawing |
| Electrical ratings | Current and voltage are not supplied for these models |
Check the selected reference.
Search a model or choose a section. A model link opens its corresponding catalogue illustration; shared range images are identified by their captions.
14 models / configurations
No matching model. Clear the filters or try a shorter reference.
CST8 strip models
CST1 single terminal models
| CHSO model | Section mm² | Screw size | Material options |
|---|---|---|---|
| CST1-01 | 6 | M2.5 × 4 | PE / PP / PA |
| CST1-02 | 10 | M2.5 × 4 | PE / PP / PA |
| CST1-1 | 16 | M2.5 × 4 | PE / PP / PA |
| CST1-2 | 25 | M3 × 5 | PE / PP / PA |
| CST1-3 | 35 | M3 × 6 | PE / PP / PA |
| CST1-4 | 50 | M4 × 6 | PE / PP / PA |
| CST1-5 | 70 | M4 × 7 | PE / PP / PA |
| CST1-6 | 95 | M4 × 7 | PE / PP / PA |
| CST1-7 | 120 | M5 × 12 | PE / PP / PA |
Catalogue notes & confirmation points
- CST8-25 has an implausible printed Ø value of 58 mm. It is marked Confirm; no decimal correction has been guessed.
Review the physical format.
Open the original catalogue illustrations. Dimensions are millimetres unless the drawing indicates otherwise. Model captions on this page use CHSO order references.
CST8 terminal strip range
CST8 L / B / H / H1 / E / Ø drawing
CST1 single terminal range
Specify the complete configuration.
- Strip or single-terminal reference
- Conductor section and material option
- Screw size, dimensions and quantities
- Required drawing revision, installation instructions and compliance evidence
Before you specify.
What does the CST range cover?
CST8 strips and CST1 single terminals cover different conductor sections and fixing formats. Use the dimension-letter drawing for CST8 and the screw-size table for CST1.
Which details are needed to specify CST?
Strip or single-terminal reference. Conductor section and material option. Screw size, dimensions and quantities.
Are all catalogue figures ready for final design?
CST8-25 has an implausible printed Ø value of 58 mm. It is marked Confirm; no decimal correction has been guessed.
What documentation should I request for the selected model?
Request the approved dimensional drawing, installation instructions and any required material or compliance evidence for the exact order configuration. A general catalogue illustration or material grade is not a blanket certification of every finished model.
Specify your CST terminal list.
Send models, quantities, conductor details and the mounting arrangement. Include the accessories and documents your project requires.