Компания Wenzhou Changsong Electric Co., Ltd.
Каталоги и технические файлыКонтакты и запросыWhatsApp
CHSOИНДУСТРИАЛЬНАЯ ЭЛЕКТРОНИКАЗапросите предложение 0→
Copper connectors

GTY Tinned Copper Butt Connectors

Straight copper compression sleeves for joining copper conductors end to end. GTY combines small and large sizes in one 1.5–1000 mm² selection table.

1.5–1000 mm²T2 copperCompression connection
GTY Tinned Copper Butt Connectors
GTY · Copper connectors
Технические данные

Material, connection & construction

GTY product specifications
ПараметрСпецификация
СерияGTY
Product formTinned Copper Butt Connectors
Conductor / interfaceCopper-to-copper conductor joint
Body materialT2 copper
Size range1.5–1000 mm²
Connection methodCompression joint
InsulationNon-insulated; provide application-specific joint insulation and enclosure protection
РазмерыMillimetres; conductor cross-section in mm²
FinishTin-plated copper
Выбор модели

Модели и размеры

All dimensional values are in millimetres. Conductor sizes are in mm². Use the symbols in the drawing for the selected construction.

GTY-1 and GTY-2 denote the small- and large-size range presentations; order by the GTY conductor-size code.

GTY Tinned Copper Butt Connectors construction
Product construction
GTY Tinned Copper Butt Connectors dimension symbols
Dimensional geometry · All dimensions in mm
Use the dimension symbols in this series drawing; symbols can differ between constructions.

GTY model dimensions
МодельTube OD DTube ID dOverall length L
GTY-1.53.71.820
GTY-2.542.520
GTY-44.83.120
GTY-65.53.825
GTY-106.84.830
GTY-167.55.535
GTY-259740
GTY-3510.58.245
GTY-5012.59.850
GTY-7014.511.555
GTY-9517.513.560
GTY-12019.51565
GTY-1502116.570
GTY-18523.518.575
GTY-24026.52180
GTY-300302485
GTY-400342790
GTY-5003830100
GTY-6304535110
GTY-8005039150
GTY-10005644170
Large-size GTY connecting sleeves
GTY large-size sleeves
Заявка и установка

Select the complete connection

Подходит для применения

  • Straight cable joints and copper-wire splices in protected installations
  • Panel maintenance and planned cable extensions
  • Equipment wiring where the compression joint is insulated and mechanically supported

Список заказанных товаров

Specify GTY construction, conductor material and nominal section, conductor strand class, both conductor sizes, joint space, tool/die system, quantity and required finish.

Последовательность установки

  1. Isolate the circuit and verify that it is de-energised. Identify the conductor material, section and strand construction.
  2. Select the matching connector, tool and die combination. Strip to the required insertion length without cutting or losing strands.
  3. Insert the conductor fully and crimp in the sequence and number of compressions specified for the connector/tool system. Do not substitute a die solely because its size marking looks similar.
  4. Inspect the compression, conductor retention and contact alignment. Restore suitable insulation and protection, then carry out the assembly checks before energising.
Практические ответы

Часто задаваемые вопросы

What distinguishes GTY from other cable connectors?

Straight copper compression sleeves for joining copper conductors end to end. GTY combines small and large sizes in one 1.5–1000 mm² selection table.

How do I select the correct GTY size?

Specify GTY construction, conductor material and nominal section, conductor strand class, both conductor sizes, joint space, tool/die system, quantity and required finish.

What should I check before ordering this series?

GTY-1 and GTY-2 denote the small- and large-size range presentations; order by the GTY conductor-size code.

Does the conductor size determine a universal current rating?

No. Connection current depends on the cable material and size, insulation temperature, terminal interface, installation conditions and verified crimp system. Select the whole circuit and connection together.

Can I use any crimping die with the same size number?

No. Die profile, tool force, connector wall thickness and conductor construction work as a system. Use the specified tool/die combination for the chosen connector.

Does this connector provide electrical insulation?

No. These are conductive connection components. Provide the joint insulation, sealing and mechanical protection required by the cable system and installation.

Запросы от дистрибьюторов и монтажных компаний

Specify the conductor.
Match the connection.

Include GTY model and construction, conductor material and size, stud-hole or joint requirements, quantities and packaging needs.

Запрос на цену ↗
WhatsApp