Компания Wenzhou Changsong Electric Co., Ltd.
Каталоги и технические файлыКонтакты и запросыWhatsApp
CHSOИНДУСТРИАЛЬНАЯ ЭЛЕКТРОНИКАЗапросите предложение 0→
Aluminium connectors

DIN GL Aluminium Connecting Tubes

Aluminium compression tubes with dimension-specific size options. Compare bore, outer diameter and length together for a planned aluminium cable joint.

10–1000 mm²AluminiumCompression connection
DIN GL Aluminium Connecting Tubes
DIN GL · Aluminium connectors
Технические данные

Material, connection & construction

DIN GL product specifications
ПараметрСпецификация
СерияDIN GL
Product formAluminium Connecting Tubes
Conductor / interfaceAluminium-to-aluminium conductor joint
Body materialAluminium
Size range10–1000 mm²
Connection methodCompression joint
InsulationNon-insulated; provide application-specific joint insulation and enclosure protection
РазмерыMillimetres; conductor cross-section in mm²
Выбор модели

Модели и размеры

All dimensional values are in millimetres. Conductor sizes are in mm². Use the symbols in the drawing for the selected construction.

DIN GL is the series designation. The 400 and 500 sizes each have two dimensional versions; quote D × d × L to identify the required part. The listed 625 code is retained as a distinct ordering size.

DIN GL Aluminium Connecting Tubes construction
Product construction
DIN GL Aluminium Connecting Tubes dimension symbols
Dimensional geometry · All dimensions in mm
Use the dimension symbols in this series drawing; symbols can differ between constructions.

DIN GL model dimensions
МодельTube OD DTube ID dOverall length L
DIN GL-1010555
DIN GL-16125.655
DIN GL-2512770
DIN GL-3514885
DIN GL-50161085
DIN GL-7018.511.5105
DIN GL-9522.513.5105
DIN GL-1202314.8105
DIN GL-1502516.5125
DIN GL-18528.518.3125
DIN GL-2403221125
DIN GL-3003423.4125
DIN GL-40038.526210
DIN GL-40042.528330
DIN GL-5004429210
DIN GL-5004631210
DIN GL-6255235330
DIN GL-8005840350
DIN GL-10006044350
Заявка и установка

Select the complete connection

Подходит для применения

  • Aluminium-to-aluminium straight cable joints
  • Distribution feeder extensions with appropriate joint insulation
  • Cable repairs using a compatible aluminium crimp system

Список заказанных товаров

Specify DIN GL construction, conductor material and nominal section, conductor strand class, both conductor sizes, joint space, tool/die system, quantity and required finish.

Последовательность установки

  1. Isolate the circuit and verify that it is de-energised. Identify the conductor material, section and strand construction.
  2. Select the matching connector, tool and die combination. Strip to the required insertion length without cutting or losing strands.
  3. Prepare the aluminium contact surface and apply the joint compound specified by the connection system. Keep compound and preparation appropriate to each metal.
  4. Insert the conductor fully and crimp in the sequence and number of compressions specified for the connector/tool system. Do not substitute a die solely because its size marking looks similar.
  5. Inspect the compression, conductor retention and contact alignment. Restore suitable insulation and protection, then carry out the assembly checks before energising.
Практические ответы

Часто задаваемые вопросы

What distinguishes DIN GL from other cable connectors?

Aluminium compression tubes with dimension-specific size options. Compare bore, outer diameter and length together for a planned aluminium cable joint.

How do I select the correct DIN GL size?

Specify DIN GL construction, conductor material and nominal section, conductor strand class, both conductor sizes, joint space, tool/die system, quantity and required finish.

What should I check before ordering this series?

DIN GL is the series designation. The 400 and 500 sizes each have two dimensional versions; quote D × d × L to identify the required part. The listed 625 code is retained as a distinct ordering size.

Does the conductor size determine a universal current rating?

No. Connection current depends on the cable material and size, insulation temperature, terminal interface, installation conditions and verified crimp system. Select the whole circuit and connection together.

Can I use any crimping die with the same size number?

No. Die profile, tool force, connector wall thickness and conductor construction work as a system. Use the specified tool/die combination for the chosen connector.

Does this connector provide electrical insulation?

No. These are conductive connection components. Provide the joint insulation, sealing and mechanical protection required by the cable system and installation.

Запросы от дистрибьюторов и монтажных компаний

Specify the conductor.
Match the connection.

Include DIN GL model and construction, conductor material and size, stud-hole or joint requirements, quantities and packaging needs.

Запрос на цену ↗
WhatsApp