Компания Wenzhou Changsong Electric Co., Ltd.
Каталоги и технические файлыКонтакты и запросыWhatsApp
CHSOИНДУСТРИАЛЬНАЯ ЭЛЕКТРОНИКАЗапросите предложение 0→
Биметаллическая фурнитура

AL-CU Copper-Insert Bimetallic Lugs

Aluminium cable lugs with a copper insert at the bolted contact face. This construction provides a copper contact interface for an aluminium conductor termination.

35–240 mm²Copper / aluminiumBolted palm
AL-CU Copper-Insert Bimetallic Lugs
AL-CU · Bimetallic lugs
Технические данные

Material, connection & construction

AL-CU product specifications
ПараметрСпецификация
СерияAL-CU
Product formCopper-Insert Bimetallic Lugs
Conductor / interfaceAluminium conductor to copper contact interface
Body materialCopper / aluminium
Size range35–240 mm²
Connection methodCrimped barrel with bolted palm
InsulationNon-insulated; provide application-specific joint insulation and enclosure protection
РазмерыMillimetres; conductor cross-section in mm²
Transition constructionCopper insert at contact palm
Выбор модели

Модели и размеры

All dimensional values are in millimetres. Conductor sizes are in mm². Use the symbols in the drawing for the selected construction.

The dimensional symbols follow this series drawing. In particular, d2 is the conductor bore and d3 is the mounting-hole diameter.

AL-CU Copper-Insert Bimetallic Lugs construction
Product construction
AL-CU Copper-Insert Bimetallic Lugs dimension symbols
Dimensional geometry · All dimensions in mm
Use the dimension symbols in this series drawing; symbols can differ between constructions.

AL-CU model dimensions
МодельC1C2d1d2d3LbD
AL-CU-3514.51614810.5672621
AL-CU-5014.516.5161010.5722721
AL-CU-7016.5181811.513863224.5
AL-CU-9517.5192213.513903526.5
AL-CU-12016.519221513913526.5
AL-CU-15018.521.52516.5131033526.5
AL-CU-1852222.52818.5131064026.5
AL-CU-24025.5263221171164531
Заявка и установка

Select the complete connection

Подходит для применения

  • Aluminium feeder cables terminating at copper equipment connections
  • Distribution cabinets requiring a controlled Cu/Al interface
  • Retrofit projects where the barrel and palm fit the cable and terminal

Список заказанных товаров

Specify AL-CU construction, conductor material and nominal section, conductor strand class, stud-hole diameter, palm clearance, tool/die system, quantity and required finish.

Последовательность установки

  1. Isolate the circuit and verify that it is de-energised. Identify the conductor material, section and strand construction.
  2. Select the matching connector, tool and die combination. Strip to the required insertion length without cutting or losing strands.
  3. Prepare the aluminium contact surface and apply the joint compound specified by the connection system. Keep compound and preparation appropriate to each metal.
  4. Insert the conductor fully and crimp in the sequence and number of compressions specified for the connector/tool system. Do not substitute a die solely because its size marking looks similar.
  5. Place the palm flat against the intended terminal, use matching hardware and tighten to the equipment connection specification. Support the cable so the palm carries no avoidable bending load.
  6. Inspect the compression, conductor retention and contact alignment. Restore suitable insulation and protection, then carry out the assembly checks before energising.
Практические ответы

Часто задаваемые вопросы

What distinguishes AL-CU from other cable connectors?

Aluminium cable lugs with a copper insert at the bolted contact face. This construction provides a copper contact interface for an aluminium conductor termination.

How do I select the correct AL-CU size?

Specify AL-CU construction, conductor material and nominal section, conductor strand class, stud-hole diameter, palm clearance, tool/die system, quantity and required finish.

What should I check before ordering this series?

The dimensional symbols follow this series drawing. In particular, d2 is the conductor bore and d3 is the mounting-hole diameter.

Does the conductor size determine a universal current rating?

No. Connection current depends on the cable material and size, insulation temperature, terminal interface, installation conditions and verified crimp system. Select the whole circuit and connection together.

Can I use any crimping die with the same size number?

No. Die profile, tool force, connector wall thickness and conductor construction work as a system. Use the specified tool/die combination for the chosen connector.

Which side takes the aluminium conductor?

Use the aluminium barrel for the aluminium cable. The copper section provides the copper-side connection; follow the Cu/Al orientation in the series drawing.

Запросы от дистрибьюторов и монтажных компаний

Specify the conductor.
Match the connection.

Include AL-CU model and construction, conductor material and size, stud-hole or joint requirements, quantities and packaging needs.

Запрос на цену ↗
WhatsApp