Wenzhou Changsong Electric Co., Ltd.
Catálogos e arquivos técnicosContato e perguntasWhatsApp
CHSOELETRICIDADE INDUSTRIALSolicite um orçamento 0→
Ring & fork / RV SERIES

RV Insulated Ring Terminals

RV insulated ring terminals combine a closed ring palm with an insulated crimp barrel. They suit copper-wire connections to studs and screws where the terminal should remain captured until the fastener is removed.

0.5–6 mm²37 variantsPVC
View model dimensions ↓
RV Insulated Ring Terminals
PRODUCT SPECIFICATION

Built around your connection.

Conductor range
0.5–6 mm²
Conductor
Copper wire
Contact material
Copper
Insulation
PVC
Connection
Ring & fork
Variants
37

Selection essentials

Select the wire barrel and stud hole independently. For example, RV2-6 has a 1.5–2.5 mm² barrel and a 6.4 mm stud hole.

Typical applications

Control-panel studs, screw terminals and accessible bolted copper-wire connections.

COMPLETE MODEL TABLE

RV dimensions & wire sizes.

RV terminal dimensional drawing
RV dimensional reference

Read the dimensions before selecting.

Select the wire barrel and stud hole independently. For example, RV2-6 has a 1.5–2.5 mm² barrel and a 6.4 mm stud hole.

All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.

37 model variants

RV Insulated Ring Terminals — model dimensions and conductor selection
ModeloWire mm²AWGColorImax AHole d2 mmPalm B mmL mmF mmH mmD mm
RV1.25-30.5–1.522–16Red193.25.717.84.9510.04.3
RVS1.25-3.50.5–1.522–16Red193.75.717.84.9510.04.3
RVM1.25-3.50.5–1.522–16Red193.76.620.16.310.04.3
RVL1.25-3.50.5–1.522–16Red193.7821.5710.04.3
RVS1.25-40.5–1.522–16Red194.36.620.16.310.04.3
RVL1.25-40.5–1.522–16Red194.3821.5710.04.3
RV1.25-50.5–1.522–16Red195.3821.5710.04.3
RVL1.25-50.5–1.522–16Red195.39.8238.510.04.3
RVS1.25-60.5–1.522–16Red196.49.8238.5104.3
RV1.25-60.5–1.522–16Red196.411.627.511.110.04.3
RV1.25-80.5–1.522–16Red198.411.627.511.110.04.3
RV1.25-100.5–1.522–16Red1910.513.631.613.910.04.3
RV1.25-120.5–1.522–16Red191319.23616.510.04.3
RV2-31.5–2.516–14Blue273.26.617.84.310.04.9
RVS2-3.51.5–2.516–14Blue273.76.617.84.310.04.9
RVM2-3.51.5–2.516–14Blue273.76.621710.04.9
RVL2-3.51.5–2.516–14Blue273.78.522.57.7510.04.9
RVS2-41.5–2.516–14Blue274.36.619.36.210.04.9
RVL2-41.5–2.516–14Blue274.38.522.57.7510.04.9
RVS2-51.5–2.516–14Blue275.38.522.57.7510.04.9
RVL2-51.5–2.516–14Blue275.39.522.57.2510.04.9
RV2-61.5–2.516–14Blue276.41227.61110.04.9
RV2-81.5–2.516–14Blue278.41227.61110.04.9
RV2-101.5–2.516–14Blue2710.513.630.213.910.04.9
RV2-121.5–2.516–14Blue271319.235.416.510.04.9
RV3.5-42.5–414–12Black374.3824.57.713.06.2
RVS3.5-52.5–414–12Black375.3824.57.713.06.2
RVL3.5-52.5–414–12Black375.31227.97.713.06.2
RV3.5-62.5–414–12Black376.41227.97.713.06.2
RV5.5-3.54–612–10Yellow483.77.221.45.913.06.7
RVS5.5-44–612–10Yellow484.37.221.45.913.06.7
RVL5.5-44–612–10Yellow484.39.525.58.313.06.7
RV5.5-54–612–10Yellow485.39.525.58.313.06.7
RV5.5-64–612–10Yellow486.41231.51313.06.7
RV5.5-84–612–10Yellow488.41533.713.713.06.7
RV5.5-104–612–10Yellow4810.51533.713.713.06.7
RV5.5-124–612–10Yellow481319.238.11613.06.7

Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.

AWG and kcmil values are size references, not exact conversions of every metric cross-section.

Imax is the terminal size reference limit. The permissible circuit current also depends on wire size, ambient temperature, crimp quality and the mating terminal; use the lowest applicable limit.

ASSEMBLY GUIDE

A suitable terminal needs a suitable crimp.

01 / Match

Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.

02 / Prepare

Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.

03 / Crimp

Use a die intended for this terminal construction and the selected wire size. Complete the tool’s crimp cycle.

04 / Inspect

Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.

RV questions answered.

What is the RV series used for?

RV insulated ring terminals combine a closed ring palm with an insulated crimp barrel. They suit copper-wire connections to studs and screws where the terminal should remain captured until the fastener is removed.

How do I choose a RV model?

Select the wire barrel and stud hole independently. For example, RV2-6 has a 1.5–2.5 mm² barrel and a 6.4 mm stud hole.

Can I select the terminal by insulation color alone?

No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.

How should the terminal be crimped?

Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.

What should I include in an enquiry?

List the complete RV model code, quantity and conductor size. Add the stud, tab, pin or barrel dimensions relevant to your installation and your destination country.

COMPARE CONNECTION OPTIONS

Related terminal families.

BUILD YOUR TERMINAL ORDER

Specify your RV models.

Send the complete model codes, quantities, conductor sizes and destination country.

Enquire with CHSO →
WhatsApp