Wenzhou Changsong Electric Co., Ltd.
Catálogos e arquivos técnicosContato e perguntasWhatsApp
CHSOELETRICIDADE INDUSTRIALSolicite um orçamento 0→
UKK Distribution Blocks

UKK400A Power Distribution Block

UKK400A single-pole power distribution block: 400 A, 95–185 mm² main input and 11 branch outputs under a transparent cover.

400 A11 outputsSingle pole
UKK400A Power Distribution Block
UKK400A · UKK Distribution Blocks
Technical data

Product specifications

UKK400A technical specifications
ParameterSpecification
Product modelUKK400A
Rated current400 A
Rated insulation voltage (Ui)1000 V
Electrical arrangementOne common potential / single pole
Main connection95–185 mm² copper conductor
Branch outputs11
Conductor materialNickel-plated copper
Insulating housingFlame-retardant PVC
CoverTransparent polycarbonate
MountingDIN rail or screw fixing
Overall dimensions H × D × W96 × 50 × 49 mm
Mounting centres85 × 29 mm
Connections & dimensions

Conductor entries & tightening torque

UKK400A selection table
ConnectionEntriesConductor / busbar sizeTorque (N·m)
Main input195–185 mm²25
Branch outputs26–35 mm² bare / 6–25 mm² with ferrule4.4
Branch outputs52.5–16 mm²2.7
Branch outputs42.5–10 mm²2.7

Connection torque varies with entry size. Ui is an insulation parameter; select the complete installation for its operating voltage and protection requirements.

Additional product reference image
UKK400A original product reference
Mechanical layout

Dimensional drawing

Dimensions in millimetres. Compare the drawing with the option table when selecting a length or connection-position count.

UKK400A dimensional drawing in millimetres
Application & installation

Select for the complete panel

Choose UKK400A when the feeder is 95–185 mm² and 11 branch connections are required. Keep the sum of branch currents within the block rating and coordinate each branch with conductor size and protective devices.

Application fit

  • Feeder branching in low-voltage distribution panels
  • Power distribution within machinery control cabinets
  • Organised replacement of multiple wires sharing one feeder terminal

Installation sequence

  1. Isolate the circuit and verify that it is de-energised.
  2. Secure the terminal assembly to the matching rail or mounting surface. Keep accessible metal parts separated from other potentials.
  3. Prepare conductors for full engagement in the clamp, without damaged strands or exposed copper outside the entry.
  4. Tighten each entry to the torque listed for that entry size.
  5. Check conductor retention, circuit identification and continuity. Close any fitted cover before energising the completed assembly.
Respostas práticas

Perguntas frequentes

What does UKK400A connect?

UKK400A single-pole power distribution block: 400 A, 95–185 mm² main input and 11 branch outputs under a transparent cover.

Are the outputs separate poles?

No. All entries in a single UKK block share one electrical potential. Use separate blocks for separate phases or neutral.

Is Ui the operating-voltage rating?

No. Rated insulation voltage describes insulation coordination. It is not permission to operate a complete assembly at that voltage.

Does the cover make the block waterproof?

No. Install the block inside an enclosure suited to the operating environment. Keep the cover closed after connection.

Distributor & OEM inquiries

Specify the connection.
Build a clear inquiry.

Include UKK400A Power Distribution Block model code, quantities, conductor sizes, destination and packaging requirements.

Request pricing
WhatsApp