Wenzhou Changsong Electric Co., Ltd.
Catálogos y ficheros técnicosContacto e indagaciónWhatsApp
CHSOELECTRÓNICA INDUSTRIALSolicite un presupuesto 0→
Ring & fork / SV SERIES

Terminales de palanca aislados SV

SV insulated fork terminals terminate copper wires beneath a screw or stud while allowing removal after the screw is loosened. The open fork and insulated barrel simplify accessible panel connections.

0.5–6 mm²32 variantsPVC
View model dimensions ↓
SV Insulated Fork Terminals
PRODUCT SPECIFICATION

Built around your connection.

Conductor range
0.5–6 mm²
Director de orquesta
Copper wire
Contact material
Cobre
Insulation
PVC
Conexión
Anillo y tenedor
Variants
32

Selection essentials

Select the slot diameter and palm width for the screw terminal. Use an RV ring terminal when the connection requires a closed eye.

Typical applications

Control-panel studs, screw terminals and accessible bolted copper-wire connections.

COMPLETE MODEL TABLE

SV dimensions & wire sizes.

SV terminal dimensional drawing
SV dimensional reference

Read the dimensions before selecting.

Select the slot diameter and palm width for the screw terminal. Use an RV ring terminal when the connection requires a closed eye.

All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.

32 model variants

SV Insulated Fork Terminals — model dimensions and conductor selection
ModeloWire mm²AWGColorImax ASlot d2 mmPalm B mmL mmF mmH mmD mmMetal T mm
SV1.25-30.5–1.522–16Red193.25.721.66.5104.30.7
SVS1.25-3.50.5–1.522–16Red193.75.721.66.5104.30.7
SVL1.25-3.50.5–1.522–16Red193.76.421.26.5104.30.7
SVS1.25-40.5–1.522–16Red194.36.421.26.5104.30.7
SVM1.25-40.5–1.522–16Red194.37.221.26.5104.30.7
SVL1.25-40.5–1.522–16Red194.38.121.26.5104.30.7
SVS1.25-50.5–1.522–16Red195.38.121.26.5104.30.7
SVL1.25-50.5–1.522–16Red195.39.521.26.5104.30.7
SVS1.25-60.5–1.522–16Red196.49.521.26.5104.30.7
SVL1.25-60.5–1.522–16Red196.41227.211104.30.7
SV2-31.5–2.516–14Blue273.25.721.26.510.64.90.8
SVS2-3.51.5–2.516–14Blue273.75.721.26.510.64.90.8
SVL2-3.51.5–2.516–14Blue273.76.221.26.510.64.90.8
SVS2-41.5–2.516–14Blue274.36.421.26.510.64.90.8
SVM2-41.5–2.516–14Blue274.37.221.26.510.64.90.8
SVL2-41.5–2.516–14Blue274.38.121.26.510.64.90.8
SVS2-51.5–2.516–14Blue275.38.121.26.510.64.90.8
SVL2-51.5–2.516–14Blue275.39.521.26.510.64.90.8
SVS2-61.5–2.516–14Blue276.49.521.26.510.64.90.8
SVL2-61.5–2.516–14Blue276.41227.81110.64.90.8
SV2-81.5–2.516–14Blue278.41227.81110.64.90.8
SV3.5-32.5–414–12Black373.25.724.87136.21.0
SV3.5-42.5–414–12Black374.3824.87136.21.0
SV3.5-52.5–414–12Black375.3824.87136.21.0
SV3.5-62.5–414–12Black376.412.128.312.1136.21.0
SV5.5-3.54–612–10Yellow483.78.4267.5136.71.0
SVS5.5-44–612–10Yellow484.38.4267.5136.71.0
SVL5.5-44–612–10Yellow484.39267.5136.71.0
SV5.5-54–612–10Yellow485.39267.5136.71.0
SVS5.5-64–612–10Yellow486.49267.5136.71.0
SVL5.5-64–612–10Yellow486.4123212136.71.0
SV5.5-84–612–10Yellow488.4143111.5136.71.0

Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.

AWG and kcmil values are size references, not exact conversions of every metric cross-section.

Imax is the terminal size reference limit. The permissible circuit current also depends on wire size, ambient temperature, crimp quality and the mating terminal; use the lowest applicable limit.

ASSEMBLY GUIDE

A suitable terminal needs a suitable crimp.

01 / Match

Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.

02 / Prepare

Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.

03 / Crimp

Use a die intended for this terminal construction and the selected wire size. Complete the tool’s crimp cycle.

04 / Inspect

Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.

SV questions answered.

What is the SV series used for?

SV insulated fork terminals terminate copper wires beneath a screw or stud while allowing removal after the screw is loosened. The open fork and insulated barrel simplify accessible panel connections.

How do I choose a SV model?

Select the slot diameter and palm width for the screw terminal. Use an RV ring terminal when the connection requires a closed eye.

Can I select the terminal by insulation color alone?

No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.

How should the terminal be crimped?

Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.

¿Qué debería incluir en una consulta?

List the complete SV model code, quantity and conductor size. Add the stud, tab, pin or barrel dimensions relevant to your installation and your destination country.

COMPARE CONNECTION OPTIONS

Related terminal families.

CONSTRUYE TU PEDIDO TERMINAL

Specify your SV models.

Envíe los códigos completos del modelo, las cantidades, los tamaños de los conductores y el país de destino.

Consultar con CHSO →
WhatsApp