FLDNY Nylon Flag se desconecta
FLDNY nylon flag disconnects route the wire at a right angle to a 6.35 × 0.8 mm tab. This compact arrangement is useful where straight connectors would project into a cover or adjacent component.
Built around your connection.
- Conductor range
- 0.5–6 mm²
- Director de orquesta
- Copper wire
- Contact material
- Brass
- Insulation
- Nylon
- Conexión
- Desconecte
- Variants
- 3
Selection essentials
Check the right-angle wire exit and surrounding clearance before choosing a flag connector instead of a straight receptacle.
Typical applications
Appliance wiring, control equipment and components fitted with matching flat-tab connections.
FLDNY dimensions & wire sizes.
Read the dimensions before selecting.
Check the right-angle wire exit and surrounding clearance before choosing a flag connector instead of a straight receptacle.
All dimensional columns are in millimetres. Conductor sizes are cross-sectional areas, not wire diameters. The first column contains the complete ordering code.
3 model variants
| Modelo | Wire mm² | AWG | Color | Imax A | Tab t × w mm | W mm | F mm | L mm | Bore C mm |
|---|---|---|---|---|---|---|---|---|---|
| FLDNY1.25-250 | 0.5–1.5 | 22–16 | Red | 10 | 0.8 × 6.35 | 6.6 | 7.6 | 16 | 1.7 |
| FLDNY2-250 | 1.5–2.5 | 16–14 | Blue | 15 | 0.8 × 6.35 | 6.6 | 7.6 | 16 | 2.3 |
| FLDNY5.5-250 | 4–6 | 12–10 | Yellow | 24 | 0.8 × 6.35 | 7 | 7.6 | 17.5 | 3.4 |
No models match. Clear the search or select another conductor size.
Dimensions are nominal and stated in millimetres. Select by conductor cross-section and the actual mating dimensions, not by color alone.
AWG and kcmil values are size references, not exact conversions of every metric cross-section.
Imax is the terminal size reference limit. The permissible circuit current also depends on wire size, ambient temperature, crimp quality and the mating terminal; use the lowest applicable limit.
A suitable terminal needs a suitable crimp.
Use the stated copper conductor size. Match the stud, slot, tab, tube or pin dimensions to the receiving component.
Strip the wire to the metal barrel or tube insertion length. Keep all strands intact and inside the barrel.
Use a die intended for this terminal construction and the selected wire size. Complete the tool’s crimp cycle.
Check strand capture, barrel deformation and retention. Install to the receiving component’s tightening and clearance requirements.
FLDNY questions answered.
What is the FLDNY series used for?
FLDNY nylon flag disconnects route the wire at a right angle to a 6.35 × 0.8 mm tab. This compact arrangement is useful where straight connectors would project into a cover or adjacent component.
How do I choose a FLDNY model?
Check the right-angle wire exit and surrounding clearance before choosing a flag connector instead of a straight receptacle.
Can I select the terminal by insulation color alone?
No. Match the conductor cross-section and the mating geometry first. Colors identify size families within a product system; ferrule color conventions differ between German and French systems.
How should the terminal be crimped?
Strip to the metal barrel or tube insertion length without cutting strands. Insert the conductor fully, use a die made for the terminal type and wire size, complete the crimp, then inspect strand capture and mechanical retention. Follow the receiving component’s tightening instructions.
Does full insulation make a disconnect waterproof?
No. An insulating sleeve covers conductive parts but is not a sealed housing. Use an enclosure or a specified sealed connector where moisture protection is required.
Related terminal families.
Specify your FLDNY models.
Envíe los códigos completos del modelo, las cantidades, los tamaños de los conductores y el país de destino.