Wenzhou Changsong Electric Co., Ltd.
Catálogos y ficheros técnicosContacto e indagaciónWhatsApp
CHSOELECTRÓNICA INDUSTRIALSolicite un presupuesto 0→
Cubios bimetálicos

DTL-2 Mangos de cable bimetálicos

Los conectores de compresión de cobre y aluminio están disponibles en versiones con palma redonda y palma rectangular. Cada versión tiene su propio diámetro de agujero, orificio de montaje y longitud total.

10–300 mm²Copper / aluminiumBolted palm
DTL-2 Bimetallic Cable Lugs
DTL-2 · Bimetallic lugs
Datos técnicos

Material, connection & construction

DTL-2 product specifications
ParámetroEspecificaciones
SerieDTL-2
Product formBimetallic Cable Lugs
Conductor / interfaceAluminium conductor to copper contact interface
Body materialCopper / aluminium
Size rangeRound palm: 16–300 mm²; rectangular palm: 10–300 mm²
Connection methodCrimped barrel with bolted palm
InsulationNon-insulated; provide application-specific joint insulation and enclosure protection
DimensionsMillimetres; conductor cross-section in mm²
Transition constructionJoined copper and aluminium sections
Selección del modelo

Modelos y dimensiones

All dimensional values are in millimetres. Conductor sizes are in mm². Use the symbols in the drawing for the selected construction.

The two DTL-2 versions are not dimensionally interchangeable. Include palm style in the ordering description.

DTL-2 Bimetallic Cable Lugs construction
Product construction
DTL-2 Bimetallic Cable Lugs dimension symbols
Dimensional geometry · All dimensions in mm
Use the dimension symbols in this series drawing; symbols can differ between constructions.

DTL-2 round-palm dimensions
ModeloStud hole ØBarrel OD DBarrel ID dOverall length LBarrel length L1
DTL-2-1613165.58742
DTL-2-2513166.58742
DTL-2-35131688742
DTL-2-50132098743
DTL-2-701320118743
DTL-2-95132012.58743
DTL-2-120132513.511160
DTL-2-150132515.511160
DTL-2-185133217.511660
DTL-2-240133219.511660
DTL-2-300133422.512062

Rectangular-palm version

Rectangular-palm version construction
Product construction
Rectangular-palm version dimension symbols
Dimensional geometry · All dimensions in mm
DTL-2 rectangular-palm dimensions
ModeloStud hole Ø ±0.3Barrel OD D ±0.2Barrel ID d ±0.2L ±2L1 ±2Palm width W ±0.3Thickness S ±0.3
DTL-2-108.5164.88842144.6
DTL-2-168.5165.58842144.6
DTL-2-258.51678842144.6
DTL-2-358.5168.68842144.6
DTL-2-5010.5209.51035017.45.6
DTL-2-7010.520121035017.45.6
DTL-2-9510.52012.81035017.45.6
DTL-2-120132514.81226021.57.4
DTL-2-150132515.81226021.57.4
DTL-2-185133218.113160267.6
DTL-2-240133220.113160267.6
DTL-2-300133422.81486431.88.1
Aplicación y instalación

Select the complete connection

Compatibilidad de la aplicación

  • Aluminium feeder cables terminating at copper equipment connections
  • Distribution cabinets requiring a controlled Cu/Al interface
  • Retrofit projects where the barrel and palm fit the cable and terminal

Lista de verificación de pedidos

Specify DTL-2 construction, conductor material and nominal section, conductor strand class, stud-hole diameter, palm clearance, tool/die system, quantity and required finish.

Secuencia de instalación

  1. Isolate the circuit and verify that it is de-energised. Identify the conductor material, section and strand construction.
  2. Select the matching connector, tool and die combination. Strip to the required insertion length without cutting or losing strands.
  3. Prepare the aluminium contact surface and apply the joint compound specified by the connection system. Keep compound and preparation appropriate to each metal.
  4. Insert the conductor fully and crimp in the sequence and number of compressions specified for the connector/tool system. Do not substitute a die solely because its size marking looks similar.
  5. Place the palm flat against the intended terminal, use matching hardware and tighten to the equipment connection specification. Support the cable so the palm carries no avoidable bending load.
  6. Inspect the compression, conductor retention and contact alignment. Restore suitable insulation and protection, then carry out the assembly checks before energising.
Respondes de forma práctica

Preguntas frecuentes

What distinguishes DTL-2 from other cable connectors?

Los conectores de compresión de cobre y aluminio están disponibles en versiones con palma redonda y palma rectangular. Cada versión tiene su propio diámetro de agujero, orificio de montaje y longitud total.

How do I select the correct DTL-2 size?

Specify DTL-2 construction, conductor material and nominal section, conductor strand class, stud-hole diameter, palm clearance, tool/die system, quantity and required finish.

What should I check before ordering this series?

The two DTL-2 versions are not dimensionally interchangeable. Include palm style in the ordering description.

Does the conductor size determine a universal current rating?

No. Connection current depends on the cable material and size, insulation temperature, terminal interface, installation conditions and verified crimp system. Select the whole circuit and connection together.

Can I use any crimping die with the same size number?

No. Die profile, tool force, connector wall thickness and conductor construction work as a system. Use the specified tool/die combination for the chosen connector.

Which side takes the aluminium conductor?

Use the aluminium barrel for the aluminium cable. The copper section provides the copper-side connection; follow the Cu/Al orientation in the series drawing.

Consultas de distribuidores y constructores de paneles

Especifica el conductor.
Conecte la conexión.

Include DTL-2 model and construction, conductor material and size, stud-hole or joint requirements, quantities and packaging needs.

Solicite un presupuesto ↗
WhatsApp